Halogen-Free Safety Power Cables

EN 50362 P 90 (> 20 mm up to 45 mm

Circuit integrity with shock: EN 50200 PH 90 (up to 20 mm ) andCircuit integrity FE180: IEC 60331-11 and -21, VDE 0472-814

VDE 0482-266-1, -2-4

No flame propagation: IEC 60332-3-10 and -3-24, EN 50266-1, -2-4,Flame retardant: IEC 60332-1, EN 60332-1, VDE 0482-332-1

VDE 0482-1034-1 and -2

Low smoke density: IEC 61034-1 and -2, EN 61034-1 and -2,No toxic gases: NES 02-713, NF C20-454No corrosive gases: IEC 60754-2, EN 50267-2-2, VDE 0482-267-2-2Halogen free: IEC 60754-1, EN 50267-2-1, VDE 0482-267-2-1

Standards / Material properties

direct sunlight and other external impacts.

or water only in water-proof dry tubes. Outdoor laying only when protected from

fixed > 8 ? outer

during laying > 15 ? outer

Bending radius: Single core Multiple core

Short circuit temperature + 250 ?C (temperature peak < 5 s)

Laying temperature from 5 ?C to + 70 ?C

Operation temperature from 30 ?C to + 90 ?C

Temperature range:Test voltage: 4 kV with 50 HzRated voltage: U0/U 0,6 / 1 kV

Technical data

Sheath colour: OrangeCore identification: According to VDE 0266 resp. HD 308 S2Sheath: BETAflam? copolymerInner covering: Tape or fillerInsulation: BETAflam? crosslinkedFlame barrier: MICA tapeConductors: Bare annealed copper

Construction

and for protection of valuables.

fighting, smoke exhaust systems etc. Recommended in areas where people gather

and system circuit integrity to DIN 4102 part 12 for water pumps for fire

with improved fire performance

Power cable 0,6/1 kV for fixed installation in cable systems

Halogen-free safety power cable family