Fluorocarbon Polymer Insulated cable consists of Fluorocarbon Polymer Insulated wiring sheathed in fluorocarbon polymGr, silicon rubber, urethane. PVC or similar sheathing material. Use of fluorocarbon polymer as cable insulating material permits smaller wire size and can be installed with higher packaging density. Fluorocarbon Polymer Insulated cable is used primarily for multiple signal lines and power source lines and is widely favored in such applications as instrument cabling for movable robot arms, medical instruments and computers. This cable is also enjoying increasing use in such applications as high frequency coaxial cable, flat cable and high voltage cable
Fluorocarbon Polymer Insulated cable consists of Fluorocarbon Polymer Insulated wiring sheathed in fluorocarbon polymGr, silico |
Aerial copper cable are the cables of single-layer or multi-layer aluminum or copper strands twisted on top to extrude the insulation wire. Overhead line is relative to the cable said, that is, and by the tower will be the wire at a certain height to transmit electricity lines. ...
Aerial cables are often referred to as overhead power cable, the conductor could be copper and aluminum. Jenuincable can supply different aerial cables of single-core Cu or Al aerial insulated cable, copper conductor flat aerial power cable and ABC (aerial bundled cable). It is ...
XLPE electrical wire 4 core power cables are normally used in power transmission and distribution systems. The power cable 4 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is ...