0.6/1KV Cu/XLPE/PVC Power cable

(cable, power cable, power wire, electric cable, electrical cable, xlpe insulated cable, xlpe insulated power cable, pvc cable, pvc power cable,  xlpe cable, xlpe power cable,  pvc sheathed cable, pvc sheathed power cable, insulated cable)

The single core armoured cables are used for D.C. system only. If used for A.C. system, the magnetic isolation should be applied on the steel armoire wires of non-magnetical materials should be used.

Note:

8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

7. Working Frequency Voltage Test: 2.5Uo+2kV/5min without puncture.

6. The cable is laid without horizontal drop limit.

5. The environment temperature should be no lower than 0^oC when lay. Otherwise it should be preheated.

4. D.C. resistance of the conductor complies with the stipulations of GB/T3956-1997.

3. The highest allowed operating temperature of conductor for long-term working is 90^oC. In short-circuit (Max. long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250^oC.

2. No. of core: Single-core, Two-core, Three-core, Four-core, Five-core,Three core and earth(Three primary conductor and one Neutral conductor), Three core and two((Three primary conductor and Two Neutral conductor), Four core and earth((Four primary conductor and One Neutral conductor).

1. Rated voltage: Uo/U: 0.6/1kV

Using features:

It is used to transmit and distribute power in power transmission and distribution system of 1kV. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

Application:

It is manufacture under GB/T12706-2002 standard (The same as IEC60502).

Standard :

0.6/1KV Cu/XLPE/PVC Power cable(insulated power cable,XLPE cable)