Armored Cable,CU/XLPE/SWA/PVC Power Cable

PVC or PE sheath

Galvanized steel wire armored

Copper tape or copper wire screen

XLPE insulation

Copper or aluminium conductor

Single core or multi-core

2. Brief Construction:

Voltage grade is up to 35kv, cross-section area can be up to 400 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is 90 degrees. In short circuit, conductor highest temperature should be not more than 250 degrees.

1. The products are mainly complying with IEC 60502 standard, also can be produced according to OEM requirements and other standards, such as BS standard, DIN standard, ASTM standard, etc.

This cable can be installed in duct, tray or direct burial. It is recommended that the installation instructions indicated by the Local Electric Code, or any equivalent, be followed,so that the safeguarding of persons and the integrity of the product will not be affected by eciencies in the installation.

Installation

-Standards / Testing Specications:
IEC 60502-1.

-Application:
For use in ducts, trays and direct burial in ground. The cable is subject to immerse in water all the time.

-Outer Sheath:
Polyvinyl chloride (Black)

-Core-covering:
Binding tape

-Armor:
Galvanized steel wire

-Inner Sheath:
Polyvinyl chloride (Black)

-Filler:
Polypropylene lament with lapped binding tape

-Circuit Identication:
The insulation shall be red, black

-Insulation:
Cross-linked polyethylene( XLPE or PVC)

-Conductor:
Solid or stranded copper

Power Cable

Packing: Wooden drum, steel wooden drum.

Relative manufacturing standards: IEC60505, BS, DIN.

Number of cores: 1 to 6.

Rated voltage: 0.6/1kV, 3.6/6kV.

Copper (aluminum) core, XLPE insulated, steel wire armoring, PE sheathed power cables

Copper (aluminum) core, XLPE insulated, steel wire armoring, PVC sheathed power Cables.

Copper (aluminum) core, XLPE insulated, steel tape armoring, PE sheathed power cables.

Copper (aluminum) core, XLPE insulated, steel tape armoring PVC sheathed power cables.

Copper (aluminum) core, XLPE insulated, PE sheathed power cables.

Copper (aluminum) core, XLPE insulated and sheathed power cables.

This series includes:

8. Partial Discharge Test: The discharge volume should be no more than 10pC under 1.73Uo for the cable.

For cable with Uo of 3.6kV or lower: 2.5Uo+2kV/5min without puncture.
For cable with Uo of 3.6kv~18kV: 3.5Uo/5min without puncture.
For cable with Uo of 21kV and 26 kV: 2.5Uo/30min without puncture.

7. Working Frequency Voltage Test:.

6. The cable is laid without horizontal drop limit. The Min. Bending radius of three-core cable should be no smaller than 12 times of cable outer diameter.

5. The environment temperature should be no lower than 0 when lay. Otherwise it should be preheated.

4. D.C Resistance of the conductor complies with the stipulations of GB/T3956-1997.

3. The highest allowed operating temperature of conductor for long-term working is 90oC. In short-circuit (Max. Long-term is no more than 5 seconds). The highest temperature for conductor is no more than 250.

2. No. of core: Single-core, Three-core.

1. Rated voltage: Uo/U: 26/35kV, 21/35kV, 12/20 kV (24 kV), 8.7/10kV, 8.7/15kV, 6/6kV, 6/10kV.

Using features:

It is used to transmit and distribute power in power transmission and distribution system of 35kV or lower. It is generally applied to the fields including power, construction, mines, metallurgy, petrochemical industry and communication in complete replace of oil immersed paper insulated power cable and in partial replace of PVC insulated power cable.

Application:

It is manufacture under GB/T12706-2002 standard(The same as IEC60502).

Executive Standard:

Al/Cu Conductor XLPE Insulated Thin/Thick steel armored PE Sheathed Power Cable.

XLPE insulated power cable,0.6-35KV,producing under IEC,BS,ASTM,DIN standard and OEM basis.