0.6/1kV AL/XLPE power cable

PE sheathed cables YJY series can be produced according to the requirements of customers.

Special cables,which have high requirements for security and bear the external mechanical force and certain pulling force,are applied to subways,high-storey buildings,boats, nuclear power plant and airports.

CU core XLPE insulated PO sheathed low-smoke low-halogen and low-smoke halogen-free fine steel wire armoured  power cable

WLD-YJLE32

DLD-YJLE32

Special cables,which have high requirements for security and bear the external mechanical force but bot the large pulling force,are applied to subways,high-storey buildings,boats, nuclear power plant and airports.

CU core XLPE insulated PO sheathed low-smoke low-halogen and low-smoke halogen-free steel tape armoured power cable

WLD-YJLE22

DLD-YJLE22

Special cables,which have high requirements for security but no be influenced by the external mechanical force,are applied to subways,high-storey buildings,boats, nuclear power plant and airports.

CU core XLPE insulated PO sheathed low-smoke low-halogen and low-smoke halogen-free power cable

WLD-YJLE

DLD-YJLE

Used for laying in water or ground along route which has large difference of level, able to bear external mechanical forces,and the large pulling force.

Flame-retardant and non- flame-retardant CU conductor XLPE insulated PVC sheathed fine steel wire armoured power cable

ZR- YJLV32

YJLV32

Used for directourial, able to bear external mechanical forces, but bot the large pulling force.

Flame-retardant and non- flame-retardant CU conductor XLPE insulated PVC sheathed steel tape armoured power cable

ZR-YJLV22

YJLV22

Used for indoor or outdoor installation and being able to bear specified harf-off force external mechanical forces, but the tractate force during laying.And laying single core cable in magnetic duct should be not permissible.

Flame-retardant and non- flame-retardant CU conductor XLPE insulated PVC sheathed power cable

ZR- YJLV

YJLV

Main application

Description

Type

Type ,Description and Application of Cable 

5.The bunching flame-retardant cable can pass the test according to GB/T18380-3(IEC60332-3).

4.Not be restricted by the drop height along the route.

3.It should be preheated if the ambient temperature isbelow 0⁰C.

the three cores non-armoured cable should be 15 times of cables O.D

the three cores armoured cable should be 12 times of cables O.D

the single-core non-armoured cable should be 20 times of cables O.D

the single-core armoured cable should be 15 times of cables O.D

2.The Min bending radius of laying:

  Conductor temperature at short-circuit should not exceed 250⁰C,Max. sustaining period should not exceed 5 seconds.

1.Max. permissible long-term operating temperature of conductor shall be 90⁰C.

Characteristics of Product

The cable is used for electrical power transmission and distribution system,operating at rated voltage of 0.6/1kV,50Hz.A.C.

Application Scope

Test for flame-retardant performance is based on the GB/T18380-2001&IEC60332-2004.

Standard

The cable is used for electrical power transmission and distribution system,operating at rated voltage of 0.6/1kV,50Hz.A.C.