Hard Stainless Steel Wire

Coil Wt and coil dia for hard wires

PACKING

CAST & HELIX (PITCH)

Note: The reverse bend test is not mandatory for wires to correspond with this international standard.

If the tensile grade of a wire lies between two tensile grades given in table 3, then the number of reverse bends for the next upper tensile grade shall be chosen.

The wire shall withstand without breaking the minimum number of reverse bends specified in table 3 for the appropriate diameter, tensile grade and finish. The radius of curvature of the supports for the various wire diameters is also given.

This test applies only to wire of nominal diameter between 0.5 mm inclusive ad 3.7 mm inclusive. For wires of nominal diameter less than 0.5 mm.

Reverse bend strength

Note: Other tensile grades may be used on agreement between the manufacturer and the supplier.

These nominal values are the lower limits of strength. The upper limits are equal to the lower limits in addition to the tolerance specified in table 2.

The tensile grades of wires are:

Tensile grades

The arithmetic difference between the two measurements of the diameter shall be not more than half the tolerance specified in table 1.

Ovality of the wire

Stainless Steel wire for spring is made from the selected steel. In particular to provide optimum spring efficiency, this type of wire is painstakingly finished to eliminate flaws.

Stainless Steel Wire for springs has following Characteristics:

KEl's Stainless Steel Wire for wire rope are manufactured having excellent mechanical properties, under strict guidance of technical people, diameter from 0.19 mm to 1.20 mm in bright finish and 0.50 mm to 6.00 mm in matte finish (decoated) in grade of AIS1304, 316,321 rope specs.

ROPE WIRES

KEl's Stainless Steel Wire for Springs are manufactured having excellent mechanical properties (surface, cast & helix) manufactured under strict guidance of technical people, diameter from 0.19 mm to 1.20 mm in bright finish and 0.50 mm to 6.0 mm in matte finish (coated) in grade of AISI 302, 304 & 316, 321, Standard ASTM A313 and others.

SPRING WIRES