Converter used main circuit power cable

9.  The Low Smoke Zero Halogen cable comply with the group burning test specified by GB18380.3, and the somke density is accordant with GB/T17651.1. The aqueous solution PH value of the released gas should not smaller than 4.3, conductivity not more than 10 us/mm.

8.  Flame-retardant cable comply with the group burning test specified by GB18380.3, and the somke density is accordant with GB/T17651.1. The DHL content of the released gas during burning should be not bigger than 100mg/g.

7.  Withstand 3.5kv/5min power frequency withstand voltage test without breakdown.

6.  The DC resistance of conductor is acoordant with GB/T3965 standard.

5.  With excellent shield property, and can reduce the impacts of higher harmonics caused by frequency converter.

4.  The ambient temperature when laying is not lower than 0, Min. bend radius not less than 15 times of the out diameter.

3.  In short circuit(Max. Duarance 5s), XLPE insulation cable not exceed 160

                                                                                              PVC insulation cable, 70

2.  Permitted Max. operation temperature of the cable conductor: XLPE insulation cable,90

1.  Rated voltage Uo/U 0.6/1Kv.

Operational Performance and Technical Properties

The power cable for frequency converter is mainly used as supply cable and connection cord in frequency control and drive system, and the cable of this system is specially fit for water pump, air blower, transmisson line and air conditioner used in paper making, steel, textile and metal processing industry.

Converter used main circuit power cable 

Converter used main circuit Power Cable
-To control and drive system
-To used in mainly circuit
-Rated voltage Uo 0.6/1 kV