For laying in the water, seabed and large difference of level, able to bear large mechanical pressure and pulling force.
(Flame retardant) Cu, Al core XLPE insulated, thick steel wire armoured, PVC or PE sheathed power cable
(ZR)YJLV43
or
(ZR)YJLV42
(ZR)YJLV43
or
(ZR)YJLV42
For laying in shaft, water under ground and large difference of level, able to bear mechanical pressure and moderate pulling force.
(Flame retardant) Cu, Al core XLPE insulated, fine steel wire armoured, PVC or PE sheathed power cable
(ZR)YJLV33
or
(ZR)YJLV32
(ZR)YJLV33
or
(ZR)YJLV32
For laying indoor, tunnel, underground and canal. Able to bear external mechanical pulling force , but unable to bear large pulling force.
(Flame retardant) Cu, Al core XLPE insulated, steel armoured, PVC or PE sheathed power cable.
(ZR)YJLV23
or
(ZR)YJLV22
(ZR)YJY23
or
(ZR)YJV22
For laying indoor, tunnel, underground and canal. Unable to bear external mechanical pulling force and pressure during laid.
(Flame retardant) Cu, Al core XLPE insulated, PVC or PE sheathed power cable.
(ZR)YJLY23
or
(ZR)YJLV
(ZR)YJY
or
(ZR)YJV
Al core
Cu core
Main Application
Description
Type The flame-retardant cable covers all kinds of low-smoke low-halogen, low-smoke halogen free and three classes of A, B, C. We can design and manufacture special XLPE cable according to the other standards require by the customers, such as heavy section cut part conductors, water-resistant, defend termites, defend mouse, and so on.. Our company can produce both flame retardant and non-flame retardant series of XLPE power cable.. Our products can be produced according to our works specifications which are equivalent to GB12706, IEC60502, IEC60332, IEC60754, and its some indexes are superior to standards stated above..
4. Max rated temperature of cable conductor is 90 , and no higher than 250 in time of short circuit (max. Lasting time is no longer than 5s). 3. Operation temperature of cable PVC sheath is no more than 90. 2. The min bending radius of cable is stipulated as follows: Single core: 20(d+D) 5% three cores: 15(d+D) 5% (D is actual diameter of cable; d is actual outer diameter of conductor). 1. Environment temperature should be no lower than 0 for laying, the cable fall without limitation II. Working Features: I. Executive Standard: GB12706.1.3 adopts international electrician committee IEC60502 Instruction Power Cable is used to transmit power on power distribution circuit of AC 50HZ, rated voltage 35 KV or lower. It has not only excellent electrical performance, mechanical performance, heat-resistant & anti-aging performance, environment resistant character & chemical-corrosion resistant performance, but simple structure, light weight, without restriction by laying fall, and it also has high temperature (90) for long term The Application of Power Cable XLPE Insulation Power Cable
Installation
-Application:
-Insulation:
-Conductor: Power Cable |
power cable: copper conductor PVC/XLPE insulated PVC outsheath ,voltage :0.6/1kv,11kv,33kv
Delivery Time: | as your quantity, 300km per month |
Package: | internatianal wooden drum or as your requirement |
Supply Ability: | 300 Kilometer per Month |
Minimum Order Quantity: | 200 Meter |
Payment Terms: | L/C,T/T |
Port: | Shanghai or Qingdao Seaport |
Jacket: | PVC |
Conductor Material: | Copper |
Application: | Other |
Type: | Low Voltage |
Insulation Material: | XLPE OR PVC |
Model Number: | YJV VV YJLV YJLV32 JYV32 YJV72 |
Brand Name: | Huatai special cable |
Place of Origin: | Henan China (Mainland) |
XLPE electrical wire 4 core power cables are normally used in power transmission and distribution systems. The power cable 4 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is ...
The structure of 10mm 4 core and earth cable+1 earth is designed for application where the earth wires are required according to customer requirements. These 4 core and earth cable are often referred 16mm xlpe 4 core +1 cables XLPE insulated with voltage 0.6/1000v or IEC60502 4 ...
XLPE insulated 3 core power cable is normally used in power transmission and distribution systems. The three core cable wires are referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the ...