XLPE POWER CABLE

THE OEM AND CUSTOMIZED PRODUCTS WILL ALSO BE WELCOMED!

BEING LAID, THE MINIMUM TEMPERATURE OF THE CABLE SHALL NOT BE LOWER THAN ZERO DEGREE. IN THE CASE OF LOWER TEMPERATURE, HEATING MEASURES SHALL BE TAKEN.

NO DROP IN LIMITED PROVIDED THERE IS FULL MECHANICAL TENTION WHEN CABLE IS LAID. IT SI FORBIDDEN TO LAY CABLE IN IRON-PIPE OR TO FIX CABLE BY CIRCLING AROUND THE CABLE WITH IRON MATERIALS.

THE HIGHEST TEMPERATURE OF THE CONDUCTOR IN SHORT CIRCUIT (NO LONGER THAN 5 SECONDS) IN NOT MORE THAN 250 DEGREES, IF A JOINT IS IN THE CABLE, THE TEMPERATURE OF THE TINNING WELDING JOINT IS NOT MORE THAN 120 DEGREES, COMPRESSING JOINT NOT MORE THAN 150 DEGREES AND ELECTRO-WELDING JOINT NOT MORE THAN 250 DEGREES.

LONG TIME OPERATING TEMPERATURE FOR CABLE CONDUCTOR IS 90 DEGREES.

CABLE'S CHARACTERISTIC:

THE PRODUCTS ARE STRICTLY COMPLYING WITH IEC 60840 STANDARDS, ALSO CAN BE PRODUCED ACCORDING TO REASONABLE OEM REQUIREMENTS AND OTHER STANDARDS, SUCH AS BS STANDARDS, DIN STANDARDS, ASTM STANDARDS, ETC.

HIGH VOLTAGE (35KV~220KV)  COPPER OR ALUMINIUM CONDUCTOR/ XLPE INSULATION/ METAL SHEATH (LEAD OR CORRUGATED ALUMINIUM)/ HDPE OR PVC OUTER SHEATH POWER CABLE.

LAYING CONDITIONS: FOR LYAING  UNDER GROUND WITH LARGE DIFFERENT  ALTITUDE, BE ABLE TO BEAR EXTERNAL MACHANICAL FORCE AND MODERATE PULLING FORCE.

THE PRODUCTS ARE MAINLY COMPLYING WITH IEC 60502 STANDARD,  ALSO CAN BE PRODUCED ACCORDING TO OEM REQUIREMENTS AND OTHER STANDARDS, SUCH AS BS STANDARD, DIN STANDARD, ASTM STANDARD, ETC.

1KV-35 KV MULTI-CORES/ COPPER OR ALUMINIUM CONDUCTOR/ XLPE INSULATION / COPPER TAPE OR COPPER WIRE SCREEN / GALVANIZED STEEL WIRE ARMORED /  PVC OR PE SHEATH / POWER CABLE,

LAYING CONDITIONS: FOR LYAING  UNDER GROUND WITH LARGE DIFFERENT  ALTITUDE, BE ABLE TO BEAR EXTERNAL MACHANICAL FORCE AND MODERATE PULLING FORCE.

VOLTAGE GRADE IS UP TO 35KV, CROSS-SECTION AREA CAN BE UP TO 1000 SQMM  (COPPER OR ALUMINIUN CONDUCTOR). CONDUCTOR LONG-TIME  OPERATING TEMPERATURE IS 90 DEGREES. IN SHORT CIRCUIT, CONDUCTOR  HIGHEST TEMPERATURE SHOULD BE NOT MORE THAN 250 DEGREES.

THE PRODUCTS ARE MAINLY COMPLYING WITH IEC 60502 STANDARD,  ALSO CAN BE PRODUCED ACCORDING TO OEM REQUIREMENTS AND OTHER STANDARDS, SUCH AS BS STANDARD, DIN STANDARD, ASTM STANDARD, ETC.

POWER CABLE,

PVC OR PE SHEATH

ALUMINIUM WIRE ARMORED

COPPER TAPE OR COPPER WIRE SCREEN 

XLPE INSULATION

COPPER OR ALUMINIUM CONDUCTOR

SINGLE CORE

VOLTAGE 1~220KV/ CU OR AL CONCUTOR/ XLPE INSULTED/ COPPER WIRE OR TAPE SCREEN OR METAL SHEATH/ ARMORED OR UNARMORED XLPE CABLE