When compared to bare conductors they provide the following advantages:
Design of the conductor, technical characteristics and service properties conform to the requirements of SFS 5791 (1994) of Finland Standard, therefore during the installation of the conductors the use of accessories made in France and Finland is possible.
Admissible heating of current-conducting core:
Pulling stress of conductor should not exceed 35 N/mm2.
Cable laying and installation should be performed at ambient temperature not less than -20
The conductor is intended for transmission and distribution of electrical energy in overhead lines of rated AC |
Aerial copper cable are the cables of single-layer or multi-layer aluminum or copper strands twisted on top to extrude the insulation wire. Overhead line is relative to the cable said, that is, and by the tower will be the wire at a certain height to transmit electricity lines. ...
Aerial cables are often referred to as overhead power cable, the conductor could be copper and aluminum. Jenuincable can supply different aerial cables of single-core Cu or Al aerial insulated cable, copper conductor flat aerial power cable and ABC (aerial bundled cable). It is ...
Aerial Bundle Cables, normally referred to as Aerial Bundled Conductors or ABC, with 0.6/1kv, are called for combining multiple single-core cables together. ABC cable is widely used in temporary power distribution to street lighting and secondary pole-pole service cables. ABC ...