The OEM and customized products will also be welcomed!
3.4 being laid, the minimum temperature of the cable shall not be lower than zero degree. In the case of lower temperature, heating measures shall be taken.
3.3 no drop in limited provided there is full mechanical tention when cable is laid. It si forbidden to lay cable in iron-pipe or to fix cable by circling around the cable with iron materials.
3.2 the highest temperature of the conductor in short circuit (no longer than 5 seconds) in not more than 250 degrees, if a joint is in the cable, the temperature of the tinning welding joint is not more than 120 degrees, compressing joint not more than 150 degrees and electro-welding joint not more than 250 degrees.
3.1 long time operating temperature for cable conductor is 90 degrees.
3. cable's characteristic:
Laying conditions: for lyaing under ground with large different altitude, be able to bear external machanical force and moderate pulling force.
Laying conditions: for lyaing under ground with large different altitude, be able to bear external machanical force and moderate pulling force.
High voltage (35kv~220kv) copper or aluminium conductor/ xlpe insulation/ metal sheath (lead or corrugated aluminium)/ hdpe or pvc outer sheath power cable.
2.3 high voltage cable
1kv-35 kv multi-cores/ copper or aluminium conductor/ xlpe insulation / copper tape or copper wire screen / galvanized steel wire armored / pvc or pe sheath / power cable,
Voltage grade is up to 35kv, cross-section area can be up to 1000 sqmm (copper or aluminiun conductor). Conductor long-time operating temperature is 90 degrees. In short circuit, conductor highest temperature should be not more than 250 degrees.
2.2 medium voltage cabel
Low voltage (0.6/1 kv) single core or multi-core/ copper or aluminium conductor/ pvc inusulation/ steel tape armored or galvanized steel wire armored or unarmored/ pvc outer sheath power cable.
2.1 low voltage cable
2. voltage grade
1. the products are mainly complying with iec 60502 standard, also can be produced according to oem requirements and other standards, such as bs standard, din standard, astm standard, etc.
The character of th fire retardant XLPE insulated power cable is listing as follows:
The fire retardant XLPE insualted power cable can be made complying with the IEC, BS STDS copper or aluminium cable, pvc cable
try fire retardant to get through more products
Delivery Time: | Within 4 weeks or according to your request |
Package: | Wooden Drums, Steel Drums, Steel-Wooden Drums or according to your request! |
Supply Ability: | 500,000 Kilometer per Month |
Minimum Order Quantity: | 0.5 Kilometer |
Payment Terms: | L/C,T/T |
Port: | Qingdao, Shanghai or as your request |
Jacket: | PVC |
Conductor Material: | Copper |
Application: | Underground |
Type: | Medium Voltage |
Insulation Material: | XLPE |
Model Number: | ZR-YJV |
Brand Name: | YIFANG |
Place of Origin: | Anhui China (Mainland) |
XLPE electrical wire 4 core power cables are normally used in power transmission and distribution systems. The power cable 4 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is ...
The structure of 10mm 4 core and earth cable+1 earth is designed for application where the earth wires are required according to customer requirements. These 4 core and earth cable are often referred 16mm xlpe 4 core +1 cables XLPE insulated with voltage 0.6/1000v or IEC60502 4 ...
XLPE insulated 3 core power cable is normally used in power transmission and distribution systems. The three core cable wires are referred to IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is applied for the ...