power cable

Type TC Power Cable
600V, XHHW/PVC, GW
Construction
Available in sizes 8 AWG through 750 kcmils and is manufactured using Type
XHHW-2 conductors. Individual conductors are bare annealed copper covered with
XLP insulation. The overall jacket consists of a flame-retardant, moisture- and
sunlight-resistant PVC jacket. Non-halogen jacket available upon request.
Specifications
Meets or exceeds the applicable requirements of the following standards and
specifications:
ASTM - (All applicable standards)
UL 44
UL 1277 - Electrical Power and Control Tray Cables. UL 1581 - Electrical

Wires, Cables and Flexible Cords
ICEA S-58-679 - Control Cable Conductor Identification. (Method 4 - single color (black) compounds with
surface printing of numbers)
UL 1685 - Flame Exposure Test (70,000 Btu/hr)
ICEA T-29-520 - Vertical Cable Tray Flame Test (210,000 Btu/hr)
IEEE 1202 - Flame Testing of Cables for Use in Cable Tray in Industrial and Commercial Occupancies
(70,000 Bth/hr)
Meets and exceeds all construction requirements of ICEA S-95-658 (NEMA WC 70) - Unshielded 0 - 2 kV Cables,
with testing frequencies based on UL requirements.
Applications
For supplying power to motors or for connection to other power devices in industrial settings. Primary installations
include cable trays, raceways and outdoor locations where supported by a messenger wire. Type TC Power
Cable is listed for direct burial or in underground ducts and for use in Class 1, Division 2 hazardous locations
and Class 1 control circuits. This cable may be used in wet and dry locations at temperatures not to exceed 90