0.6/1kV AL/PVC/PVC power cable
Product Details
the three cores non-armoured cable should be 15 times of cables O.D
the three cores armoured cable should be 12 times of cables O.D
the single-core non-armoured cable should be 20 times of cables O.D
the single-core armoured cable should be 15 times of cables O.D
2.The Min bending radius of laying:
1.The installation temperature should be not less than 00C, and it should be preheated if the ambient temperature isbelow00C.
Installation of the cable
Laying Conditions of the Cable
For laying in shafts, and being able to bear certain axis pulling force.
AL conductor PVC insulated steel wire armoured PVC sheathed flame-retardant power cable
ZR-VLV42
For laying indoors,wells and water, and being able to bear certain pulling force .
AL conductor PVC insulated thick steel wire armoured PVC sheathed flame-retardant power cable
ZR-VLV32
For laying indoors,in tunnels and direct burial and being able to bear pulling force and pressure.
AL conductor PVC insulated steel tape armoured PVC sheathed flame-retardant power cable
ZR-VLV22
For laying indoors,ducts and tunnels,but being unable to bear pulling force and pressure.
AL conductor PVC insulated PVC sheathed flame-retardant power cable
ZR-VLV
For laying in shafts, and being able to bear certain axis pulling force.
AL conductor PVC insulated steel wire armoured PVC sheathed power cable
VLV42
For laying indoors,wells and water, and being able to bear certain pulling force .
AL conductor PVC insulated fine steel wire armoured PVC sheathed power cable
VLV32
For laying indoors,in tunnels and direct in ground and being able to bear pulling force and pressure.
AL conductor PVC insulated steel tape armoured PVC sheathed power cable
VLV22
For laying indoors,ducts and tunnels,but being unable to bear pulling force and pressure.
AL conductor PVC insulated PVC sheathed power cable
VLV
Main application
Description
|
Type
Type ,Description and Application of Cable
This product is applied to rated voltage (U0/U) 0.6/1kV power transmission and distribution system in fixed installation. Application Scope
This product is manufactured according to GB/T12706-2002(IEC60502IEC60332) Standards. Standard |
This product is applied to rated voltage (U0/U) 0.6/1kV power transmission and distribution system in fixed installation.
- Jacket:PVC
- Conductor Material:Aluminum
- Type:Low Voltage
- Insulation Material:PVC
- Model Number: (ZR)VLV (ZR)VLV22 (ZR)VLV32 (Z...
- Brand Name:XIN YUN
- Place of Origin:China (Mainland)
- Country:China (Mainland)
- telephone:86-833-2595861
| Package: | ROLL WOODEN CONTAINER |
| Supply Ability: | 260 Kilometer per Month |
| Minimum Order Quantity: | 500 Meter |
| Payment Terms: | L/C,T/T |
| Port: | the main port of China |
| Jacket: | PVC |
| Conductor Material: | Aluminum |
| Type: | Low Voltage |
| Insulation Material: | PVC |
| Model Number: | (ZR)VLV (ZR)VLV22 (ZR)VLV32 (ZR)VLV42 |
| Brand Name: | XIN YUN |
| Place of Origin: | China (Mainland) |
Send inquiry / quota request to 0.6/1kV AL/PVC/PVC power cable
Relate products of 0.6/1kV AL/PVC/PVC power cable
Power supply SATA power cable produced by Holly Electronics is a hard disk data cable. The power supply SATA power cable is also known as SATA 15pin revolution large 4PIN female +15pin female power cord. SATA Power Supply Cable Features 01. Cost-effective If your serial power ...
Come From QUZHOU HOLLY ELECTRONICS CO.,LTD
The electric power harness produced by Holly Electronics, a professioanl power cable company specialized in power cable wholesale, refers to the copper braided conductive belt 2500A large current red copper soft connection wire and large square insulated wire and copper nose ...
Come From QUZHOU HOLLY ELECTRONICS CO.,LTD
XLPE electrical wire 4 core power cables are normally used in power transmission and distribution systems. The power cable 4 core XLPE cable is referred to as IEC60502 CU/XLPE/PVC 0.6/1KV. The circular conductor is applied for the size below 16mm² and the shaped conductor is ...
