power cable

Type TC Composite Cable
600V, TFFN or VW-1 THHN/THWN
Construction
Multiconductor cables have TFFN or VW-1 THHN/THWN (PVC/Nylon)
conductors with an overall gas/vapor-tight PVC jacket. Three power conductors
and four or six control conductors.
Specifications
Conforms to the following standards and specifications:
NEC? Article 392 Cable Trays and 336 Power and Control Cable Type TC
Standard 1277 of Underwriters Laboratories, Inc.
ICEA T-30-520 - Flame Test
ICEA T-29-520 - Vertical Cable Tray Flame Test (210,000 Btu/hr)
IEEE-383 - 70,000 BTU Cable Tray Propagation Test
IEEE 1202 - 70,000 BTU Flame Tests
CSA FT4
UL E60749
Applications
For supplying power and control signals to motors or providing connection to
other power devices utilizing remote control circuits. Specifically approved
for direct burial, wet or dry locations and outdoors in cable trays where
a sunlight-resistant rating is required. UL Listed and OSHA acceptable.
Recognized for use in Class 1 or 2, Division 2 hazardous locations and for
installation in trays, wireways, troughs, channels, ducts and conduit.

Stranded Bare
Copper
High Dielectric
Strength PVC
Insulation
Conductor Jacket
Tape Binder
(optional)
PVC Jacket
Note: Stranding is
Class B, 2-14 AWG
Information based on AIW specs.
No. of
Conductors AWG
No. of
Conductors AWG
Overall Jacket
Thickness (mils)
Approx.
O.D. (in)
Approx. Weight