|
|
How does a solar cell work?
|
|
Sunlight is composed of photons, or particles of solar energy. These photons contain various amounts of energy corresponding to the different wavelengths of the solar spectrum. When
photons strike a photovoltaic cell, they may be reflected, pass right through, or be absorbed. Only the absorbed photons provide energy to generate electricity. When enough sunlight
(energy) is absorbed by the material (semiconductor), electrons are dislodged from the material's atoms. Special treatment of the material surface during manufacturing makes the
front surface of the cell more receptive to free electrons, so the electrons naturally migrate to the surface. When the electrons leave their position, holes are formed. When many
electrons, each carrying a negative charge, travel toward the front surface of the cell, the resulting imbalance of charge between the cell's front and back surface creates a
voltage potential like the negative and positive terminals of a battery. When the two surfaces are connected through an external load, electricity flows.
|
|
|
|
What is scribing and why scribing is necessary?
|
Scribing means, cutting of a grid pattern of grooves in a semiconductor material generally for the purpose of marking interconnections or to cut the solar cells into two parts.
Laser scribing is done for the fabrication of monolithic cell interconnections. Scribing, either with a mechanical stylus or a laser is used for fabricating series interconnections
allowing a large, thin-film photovoltaic panels to be made with, for example, 100 cells monolithically interconnected. The series interconnection allows the same electrical power to
be produces from the panel with a voltage 100 times that of an individual cell and the current equal to that of one cell. For CdTe thin films, the individual cell voltage is about
0.8V
|
|
|
|
Comparison between Conventional Diamond Cutter system for solar cells & Laser Solar Cell scribing system: SLT-SS-2000 offered by SAHAJANAND LASER TECHNOLOGY.
|
|
|
|
Technical:
|
|
Features
|
Conventional System
|
Laser System
|
Advantages of Laser
|
|
Tool
|
Diamond cutter
|
Laser cutter
|
Non contact type tooling. Most suitable for the brittle materials which is used in Solar cell.
|
|
Positioning Speed
|
|
60 mm / sec
|
More Positioning speed.
|
|
Cutting Speed
|
8.00 mm /sec
|
30 mm / sec
|
Faster scribing leads to comparatively high productivity.
|
|
Kerf width of the tool
|
45 microns
|
1 8 microns
|
less wastage : Because a cell costs around $ 4.1: more material saving, more economical.
|
|
Tooling Cost
|
One Diamond Cutter approx. can cut 15,000 cell
|
Laser : No replacement of tool
|
Cutter cost can be saved.
|
|
Depth of cut
|
|
0.6 mm
|
Precise depth of cut can be achieved.
|
|
Accuracy
|
|
1 micron precise accuracy
|
More accuracy can be achieved.
|
|
Cost
|
|
|
Very Cost Effective
|
|
|
The laser's precision means cell divisions can be very thin, allowing more glass surface to be devoted to power production.
In addition to the increased processing efficiency of laser scribing and cleaving of solar cells compared to conventional diamond cutting, laser scribing also significantly
diminishes the generation of shunts, which degrade the operation voltage of the cell.
|
|
|
|
