Solar Cell Scribing System : SLY

What is solar cell?

A photovoltaic cell (commonly called a solar cell) is a nonmechanical device usually made from silicon alloys. It converts sunlight into electricity. The PV cell was discovered in 1954 by Bell Telephone researchers. Late 1950s, PV cells were used to power U.S. space satellites.

Individual cells can vary in size from about 1 cm (1/2 inch) to about 10 cm (4 inches). Most photovoltaic cells are about ten percent efficient in covering sunlight to electricity with further research being conducted to raise this efficiency to fifteen-twenty percent.

Photovoltaic conversion is useful for several reasons. Conversion from sunlight to electricity is direct, so that bulky mechanical generator systems are unnecessary. The modular characteristic of photovoltaic energy allows arrays to be installed quickly and in any size required or allowed.

Presently BCSC (Buried Contact Solar Cells) and Polycrystalline CdTe-baser Photovoltaic are the latest technology in the solar cells and having efficiency is around 15-20 % approx. and we can get stable power output and long life.

How does a solar cell work?

Sunlight is composed of photons, or particles of solar energy. These photons contain various amounts of energy corresponding to the different wavelengths of the solar spectrum. When photons strike a photovoltaic cell, they may be reflected, pass right through, or be absorbed. Only the absorbed photons provide energy to generate electricity. When enough sunlight (energy) is absorbed by the material (semiconductor), electrons are dislodged from the material's atoms. Special treatment of the material surface during manufacturing makes the front surface of the cell more receptive to free electrons, so the electrons naturally migrate to the surface. When the electrons leave their position, holes are formed. When many electrons, each carrying a negative charge, travel toward the front surface of the cell, the resulting imbalance of charge between the cell's front and back surface creates a voltage potential like the negative and positive terminals of a battery. When the two surfaces are connected through an external load, electricity flows.

What is scribing and why scribing is necessary?

Scribing means, cutting of a grid pattern of grooves in a semiconductor material generally for the purpose of marking interconnections or to cut the solar cells into two parts.

Laser scribing is done for the fabrication of monolithic cell interconnections. Scribing, either with a mechanical stylus or a laser is used for fabricating series interconnections allowing a large, thin-film photovoltaic panels to be made with, for example, 100 cells monolithically interconnected. The series interconnection allows the same electrical power to be produces from the panel with a voltage 100 times that of an individual cell and the current equal to that of one cell. For CdTe thin films, the individual cell voltage is about 0.8V

Comparison between Conventional Diamond Cutter system for solar cells & Laser Solar Cell scribing system: SLT-SS-2000 offered by SAHAJANAND LASER TECHNOLOGY.

Technical:

Features	Conventional System	Laser System	Advantages of Laser
Tool	Diamond cutter	Laser cutter	Non contact type tooling. Most suitable for the brittle materials which is used in Solar cell.
Positioning Speed		60 mm / sec	More Positioning speed.
Cutting Speed	8.00 mm /sec	30 mm / sec	Faster scribing leads to comparatively high productivity.
Kerf width of the tool	45 microns	1 8 microns	less wastage : Because a cell costs around $ 4.1: more material saving, more economical.
Tooling Cost	One Diamond Cutter approx. can cut 15,000 cell	Laser : No replacement of tool	Cutter cost can be saved.
Depth of cut		0.6 mm	Precise depth of cut can be achieved.
Accuracy		1 micron precise accuracy	More accuracy can be achieved.
Cost			Very Cost Effective

The laser's precision means cell divisions can be very thin, allowing more glass surface to be devoted to power production.

In addition to the increased processing efficiency of laser scribing and cleaving of solar cells compared to conventional diamond cutting, laser scribing also significantly diminishes the generation of shunts, which degrade the operation voltage of the cell.

Laser Head
Laser	Lamp Pumped Nd:YAG Laser
Wavelength	1.064?m
Transverse Mode	TEMoo
Beam Diameter	1.0 mm, nominal , M2 < 2.5

Q-Switched Performance at 3 kHz
Average Power	75 Watts
Pulse Width, nominal	110 ns
Peak Pulse Power	75 kW
Pulse Stability ( peak- peak )	5%

CONTROLLER & CNC SYSTEM
Controller	PC based
Axis Travel (X & Y)	200 mm x 200 mm ( 250mm X 250mm optional )
Resolution	1 Micron
Accuracy	2 Micron / 25 mm
Repeatability	2 microns / 25 mm Bi-directional
Straightness & Flatness	2 Micron / 25 mm
Of Travel
Drive	Servo Control Drives
Z Axis	Manual

VISION SYSTEM
CCTV Camera	In-built

MECHANICAL
Dimensions	(L) 2000 mm x (W) 807 mm x (H) 1700 mm

ELECTRICAL
Power	380

Country:India
telephone:1-79-23287464

A photovoltaic cell (commonly called a solar cell) is a nonmechanical device usually made from silicon alloys.

*Your name:	Enter name here eg:Ralph zhang
*Your Email:	Enter email here
*To:	Sahajanandlaser Tech. Ltd
*Subject:
*Message:
	Enter between 20 to 3,000 characters. English only. Characters Remaining: 0 / 3000
*Enter the secure code shown below	Reload Image

		We do inquire for you , please wait ...

3.2V10Ah LiFePO4 Battery Cell for Solar Street Light System Solar Street Light Battery

3.2V10Ah LiFePO4 Battery Cell for Solar Street Light System Solar Street Light Battery (1) Output with high efficiency: Standard discharge current is 1C, instant impulse discharge current is 5C. (2) Good performance under high temperature, it could work under 65°C ...

Come From Shenzhen Mushang Electronics Co., Ltd.

Thin Film Solar Cell Sputtering PVD System

20000x1900x2500 [mm] Approx. Dimensions Stainless Sheet Chamber Material 5...8 No. Process Chambers PLC or PC base Electrical Control Compounds Metals, Alloys, Multi Layers, Layers 20 [kW] Generator power per cathode DC, pulsed DC, MF, RF Modes Planar / Rotatable Magnetrons < ...

Come From HIGHLIGHT TECH CORP

Laser Scribing Machine For Solar Cells

Laser Type:Diode Application:Laser Scribing Model Number:BMD Brand Name:Boao Laser Place of Origin:China (Mainland) Scribing and cuting for the mono-crystalline sillicon, poly-crystalline sillicon, amorphous-crystalline sillicon, solar cell... ...

Come From Beijing Boao Laser Tech Co., Ltd.

Solar Cell Laser Scribing Machine

Laser Type:YAG Application:Laser Scribing Model Number:YMS-50&YMS-10D Brand Name:YUEMAO LASER Place of Origin:Guangdong China (Mainland) Solar Cell Laser Scribing Machine is specially designed for scribing solar cell. ...

Come From Zhuhai Yuemao Laser Facility Engineering Co., Ltd.

Automatic Film Solar Cell Laser Scribing Machine

Laser Type:Diode Application:Laser Scribing Brand Name:YUEMAO LASER Place of Origin:Guangdong China (Mainland) Automatic Film Solar Cell Laser Scribing Machine is specially designed for processing of film solar cell. ...

Come From Zhuhai Yuemao Laser Facility Engineering Co., Ltd.

Solar Cell Scribing System

Application:Laser Scribing Place of Origin:Gujarat India Individual cells can vary in size from about 1 cm (1/2 inch) to about 10 cm (4 inches) ...

Come From SAHAJANAND LASER TECHNOLOGY LTD

Solar Cell Scribing System

Application:Laser Scribing Laser Lamp Pumped Nd:YAG Laser Wavelength 1.064?m Transverse Mode TEMoo ...

Come From SAHAJANAND LASER TECHNOLOGY LTD

Solar cell Laser Scribing Machine

Laser Type:Other Application:Laser Scribing Place of Origin:Beijing China (Mainland) Solar cell Laser Scribing machine adopts the diode pump laser.... ...

Come From Beijing Haixun Machine and Technology Co., Ltd.

CSLDXY10-100W, Portable Solar Power Supplier System(Flexible Power Cell)

Heating System:Novel Rated Voltage:12V Place of Origin:China(mainland) Portable Solar Power Supplier Sysrem(Flexiible Power Cell) ...

Come From Ningbo Dymax Co., Ltd.

Sell solar cells, solar panels, solar systems, solar products, solar mobile charger

Application for mobile phones and digital products (PSP, NDSL, MP3 etc) at 5V 1. Solar Panel: Peak Power Supplied by photocell: 0.77W 2. Operating voltage:5.5v(Max) 3. Charging current: 140mA 4. Battery capacity: 1800mAh 5. Output voltage:5.6V 6. Output current:600mA(Max) ...

Come From E-STARS INT'L TECH. CO., LIMITED