Ultra Isolation Transformers (UIT)

An ordinary isolation transformer isolates one circuit from another. Such a transformer is adequate for use with low gain circuits or insensitive instruments. However, if the transformers must work into a high gain load or sensitive instrumentation, noise potentials between the primary circuit and ground must be prevented from affecting the secondary circuits due to capacitive and resistive coupling between the transformers windings.
VERTEX Ultra Isolation Transformer (UIT) employs a unique multiple shielding technique that reduces the interwinding capacitance to a large extent and increases the DC isolation.

Technical Specifications
Single Phase (L-N)
Three Phase (L-L)
Transformer type
Naturally Aircooled for indoor application
Transformation Ratio
1 : 1 (Also Step-up / Step-down)
Primary Voltage
230 Volts 1 PH (L-N)
415 Volts 3 PH (L-L)
Secondary Voltage
110 V (OR) 230 V 1 PH
200 (OR) 415 V 3 PH (L-L)
Connection
-
Delta - Star
Input frequency range
47 53 Hz
Regulation
2 4% for 100% change in current @ unity pf
Type of lamination
CRGO (Cold Rolled Grain Oriented)
Working temperature
0 to 50
  • Country:India
  • telephone:91-80-41140023
An ordinary isolation transformer isolates one circuit from another.
*Your name:
*Your Email:
*To:UNIVERSAL ELECTRONICS
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Acrel AITR-3150 hospital isolated 230V isolation transformer for insulation system

1 Introduction The medical IT system is mainly used in important Class 2 medical locations such as operating room, ICU/CCU intensive care unit, providing safe, reliable and continuous power distribution for the important equipment at these locations. Medical insulation ...

Come From Jiangsu Acrel Electrical Manufacturing Co.,LTD.

High Precision Strong Voltage Isolation Ability Delicate Appearance Current Transformer

Primary current: 10A Imax: 100A Accuracy class: 0.1% Turns ratio: 1:1000 Load resistance: 10 Ohm Frequency: 50Hz-60Hz Dielectric withstanding volt (Hi-pot): 4KVrms Ambient temp: -40-+70 Degrees Celsius Storage temp: -40-+80 Degrees Celsius Encapsulant: epoxy Dielectric ...

Come From Deqing GIG Electronic Co., Ltd

Good Quality Safety Isolating Transformer From China

Features: 1. Low loss, and significantly energy-saving. 2. The core laminations are made up from high-quality cold-rolled grain-oriented silicon steel sheets 3. Zigzag directed flow of oil are provided within the windings 4. The regulating winding is a separate winding which ...

Come From Chongqing Savan Electromechanical Equipment Co.,Ltd