Motor-Run Capacitors

ALUMINIUM CANS, FOR AC APPLICATIONSWORKING VOLTAGES UP TO 450VAC, 50/60 HZAPPLICATION:General purpose for single phase AC loads such as fans, motors, and etc.CONSTRUCTION:The capacitor elements are formed by winding low loss, self healing, metallised polypropylene film. High speed computerised winding machines are used for this purpose. The film tension is maintained at a constant value throughout the winding process thereby totally excluding air from the windings.CONTAINER:Aluminium Cans.ENCAPSULATION:Series MA61, MA64: Biodegradable, non-toxic oil.Series MA62, MA63, MA65, MA69, MA71, MA81: resin (non-P.C.B.).TECHNICAL DATA:SERIES:MA61, MA62, MA63, MA64, MA65, MA69, MA71, MA81. STANDARD: IEC 252 (1975), VDE 0560-8. TERMINATION:Series MA61, MA62: Single 2.8mm tags.Series MA63: Flexible wires.Series MA64: Single 4.0mm tagsSeries MA65: Single or duplex 6.3mm quick connect tags, flexible wires.Series MA69, MA71, MA81: Single or duplex 6.3mm quick connect tags for all sizes, triplex 6.3mm quick connect tags for can diameters over 35mm. FIXING: Mounting stud M8x10 mm available on can diameters 45 mm and above. CAPACITANCE TOLERANCE:+ 5% (other tolerances available on request) RATED VOLTAGE:250 to 450 VAC. FREQUENCY: 50/60 Hz DISSIPATION FACTOR: Less than .0005 at 50 Hz TEST VOLTAGE BETWEEN TERMINALS: 1.5 Un for 10 seconds TEST VOLTAGE BETWEEN TERMINALS AND CONTAINER: 3 kV 50 Hz for 1 minute

ALUMINIUM CANS, FOR AC APPLICATIONS