Capacitor

Channel Structure BSMJ series Self-healing Low-voltage Power factor CapacitorsThe product - KOTO brand Channel structure(BSMJwx)low- voltage power capacitor is made of the polypropylene metallized film , applied to the 50Hz or 60Hz AC low voltage power electric system , to improve the power factor of network and voltage quality, raise the device output power and reduce the loss of power.We research new product- Channel Structure BSMJ power factor capacitor, Which obey the principle of aerodynamics and heat conduction, designed into channel structure to form cold and hot air convection, expedites the release of high temperature heat, it makes the polypropylene molecular chain to remain stable, so as to improve its ability of counterbalance, prolong its service life effectively, and do a great job of meeting the need for various application environment.Features.Good capacitance stabilization, less than 1% of annual capacitance loss, longer than 100,000 hours of service life,.The Highly skill , distinctive design and excellence performance of radiate heat the area of radiate heat is increased by 45% than traditional , it's adapted for use in outdoor packaged substation with poor radiation environment..Used in harmonic wave occasions ,it have the strong ability of counterbalance..Low dielectric loss and perfect self-healing performance..Single unit with super capacity, effectively configuration cost saving,simple and easy installation.Technical CharacteristicsType:BSMJ , BSMJwx,. Rated Voltage:200V,220V,230V,400Volts,440V,450V,525V AC,690VAC,1.2KV. Rated Output:1~90Kvar. Rated frequency: 50Hz(60Hz).. Mode of connection:3 phase (pole), single phase ,3Yo,. Capacitance Tolence:0~10% . Apply standard:GB/T12747.1-2004 IEC60831-1:1996. Voltage endurance:2.15Un in 2 seconds between T-T,3000VAC in 10 seconds between T-C. . Tangent of loss angle:<0.1%(rated voltage at 20C). . Ceiling Voltage:1.1Un. Ceiling Current:1.3Un. Self-discharge feature: The terminal voltage will reduce below 50V in 3 minutes after disconnecting from power line.. Apply condition:Indoor,-25 ~50C,humidity:<=80%RH,height<=2000MSL

made of polypropylene metallized film, applied to the 50 / 60Hz AC low voltage power electric system, to improve the power factor.