1W High Power LED diodes (Red)

The structure improve the z-force resistance up to 6 KG.

P2O solved this problem by the patented micro-structure on the lens.

    The disadvantage of using silicone lens is the wire broken issue.

     2. High reliability.

     1. Automatic Pb-free solder reflow process.

Silicone has following advantages:

Patented Micro-structure Silicon Lens

existing or available lens to get perfect light pattern.

     P2O can solve the optical problems in package level. User can easily Use any

     P2O is designed to fit any CLEAR 2nd collimator. Users neednt to use any ground surface 2nd collimator to improve the light pattern and lost the efficiency.

these problems. However, the central illuminance may drop to 50%.

      Using a 2nd collimator with ground surface is the most common way to solve

High 2nd optical lens efficiency.

     However, lower central CRI due to color difference causes bad lighting quality on the object.

2. Yellow color ring around chip imaging. (Color difference issue)

1. LED chip rectangular imaging .

performance is quite poor due to :

       When using a CLEAR secondary collimator with normal LED, the optical

Perfect light pattern and high spatial color uniformity.

       P2O High Power LEDs can be reflow at 260 degree and the light output decay is less than 10% at crucial test condition (700mA, ambient 85 degree and 85%RH).
       P2O High Power LEDs have the special design to fit secondary optics for the various lighting applications,. The user can easily get the uniform light with any secondary optics.
       With special phosphor technology, warm white P2O LEDs have very good color stability in high temperature. The typical CCT change is less than 50K when junction temperature achieves 100 degree.

       P2O High Power LED brings leading technology to the solid state lighting with its high quality and performance. With silicone lens, the P2O High Power LEDs have the highest brightness, efficacy, and excellent lifetime.

~ESD Sensitivity:2,000 V HBM

~Soldering Temperature:Max. 260 degree / Max. 10sec. (JEDEC 020c)

~Storage Temperature:-40~110 degree

~LED Operating Temperature:-40~110 degree

~LED Junction Temperature:125 degree

Feature :
~Excellent Operating Life
~High Efficacy
~Low Thermal Resistance
~SMD Device
~Instant Light
~Fully Dimmable
~No UV
~Superior ESD Protection
~RoHS Compatibility

P2O-R  (Red)
Wavelength:620~635nm(Red)
Luminous Flux:35~45lm
Forward Current:350mA
Viewing Angle:145deg

1W High Power LED

P2O-R
Wavelength:620~635nm(Red)
Luminous Flux:35~45lm
Forward Current:350mA
Viewing Angle:145deg