DESCRIPTION
AMCOMs AM244236WM-BM-R and AM244236WM-FM-R are part of the GaAs MMIC power amplifier series.
Both MMICs have 31dB gain, 36dBm output power over the 2.4 to 4.2 GHz band. These MMICs are in a ceramic
package with both RF and DC leads at the bottom level of the package to facilitate low-cost SMT assembly to the
PC board. Because of high DC power dissipation, we strongly recommend to mount these devices directly on a
metal heat sink. The FM package is the BM package mounted on a copper flange carrier. There are two screw
holes on the flange to facilitate screwing on to a metal heat sink. Both MMICs are RoHS compliant.
PERFORMANCE* (Vds = 8V, Idq = 1500mA, Vgs**=-0.76V, Ta = 25
AMCOMs AM244236WM-BM-R and AM244236WM-FM-R are part of the GaAs MMIC power amplifier series. |
Place of Origin:Massachusetts United States RFIC, MMIC, RF and Microwave Front End module, PA, LNA, mixer, Gain block, etc.used in WiFi FEM, WiMax, Zigbee.. ...
Come From ChanCe
INTRODUCTION This application note describes the use and handling of AMCOM's BM MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC Figure 1 ...
Come From AMCOM Communications, Inc.
INTRODUCTION This application note describes the use and handling of AMCOM's BM FET MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC ...
Come From AMCOM Communications, Inc.