LED Driver IC

The TU8FA0608AA is a networking color LED driver designed for a LED decorative lighting and a LED sign. Twelve channel constant current circuitry with a current value set by one external resistor and a current set register, an external clock (CLK) pin, 16bit APWM TM (Advanced Pulse Width Modulation) and a power on reset circuit, built-in data buffers for the next driver and a device controller are provided by the chip. The color LED driver includes an internal RC oscillator. Therefore, only 3 lines (LED Power (LED_VDD), Ground (LED_VSS) and Serial Data (SDI/SDO)) in an async transmission mode and only 4 lines (LED Power (LED_VDD), Ground (LED_VSS) and Serial Data (SDI/SDO) and External Clock (CLK) in a sync transmission mode are needed to connect between a cluster and a network line. This feature can reduce the number of network line and incorporate the reliability of the LED module system. The color LED drivers can be connected up to 65,000 LED modules in one serial network by a cascade method via transmission line, which transmit data as like an image or a text among clusters. So above features can reduce a network connection overhead and easy to make the connection of LED modules. In addition, the color LED driver supports both an async transmission mode and a sync transmission mode. In the case of an async transmission mode using an internal RC oscillator, the performance of data rate is maximum 460Kbps. But it is maximum 20Mbps in the case of a sync mode using an external clock (CLK) pin.

try led driver    to get through more products

  • Country:South Korea
  • telephone:82-221423750
TU8FA0608AA
*Your name:
*Your Email:
*To:terachips
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Z30043 3 Inch LCD Display MIPI Interface ST7701S Driver IC 350 Nits 480*854 QVGA

Size: 3 inch Resolution: 480*854 Interface: MIPI Driver IC View Angle: IPS Brightness: 350 cd/m² Touch Panel: Support CTP/RTP Supply Type: Factory/Manufacturer Certification: ISO9001, IATF16949, ROHS, REACH Overview of Z30043 3 Inch LCD Display MIPI Interface ST7701S Driver IC ...

Come From shenzhen zhunyi technology co.,ltd

LED Power Driver Tester

It is ccording to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC/DC), Output Characteristics Test (AC/DC), Start Characteristics Test (DC), Hormanic and DF ...

Come From LISUN GROUP in SHANGHAI

WT2080 LED Power Driver Tester

Specification: 1. Input Characteristics Test (AC) • To measure the input voltage, current, power, power factor, power grid frequency • The fundamental frequency scope of the current and voltage: 45Hz~65Hz; Narrowband range: 45Hz~5kHz; Broadband range: 45Hz~1MHz. • Voltage ...

Come From Lisun Instruments Limited

Drivers Test Equipment - WT2080 LED Power Driver Tester

Product Description WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics ...

Come From Lisun Electronics Inc.

200 Watt IP65 Efficient High Power LED UFO High Bay Light With Meanwell Driver

Yenhua high bay light is made by a die-casting aluminum lamp body and beautiful appearance. There are also two types of mounting system, pendant and flood lighting with different mounting accessories. This light can be also made with microwave motion sensor. It is usally used ...

Come From Shenzhen Yenhua Optoelectronics Co.,Ltd.

LED Power Driver Tester WT2080 can measure input Characteristics and output characteristics and input start characteristics

Product Description WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics ...

Come From Lisun Electronics Co., Ltd

Ultra-Thin Plastic Case Constant Voltage 12V/24V 60w LED Driver for Cabinet

Features: 1.Ultra-thin design, there\'s only 17,5mm thick for our 40W power supply. 2.Differnet Power 12/15/24/36/48/60w, Rated Voltage DC12V/24V 3.It can supply 4 way output holes. 4.It can link with sensor switch. *High efficency and reliability, no stroboscopic. *100% full ...

Come From Wufeng Electronics Co., Ltd

LED Power Driver Tester WT2080

Product Description WT2080 LED Power Driver Test Instrument is the comprehensive test instrument for LED drive power which is according to GB/T 24825-2009 and IEC 62384:2006. It can measure the following parameters: Input Characteristics Test (AC&DC), Output Characteristics ...

Come From Lisun Electronics (Shanghai) Co., Ltd

1000w led flood light only 24kg with philips chip and driver IP66 CE SAA approved

Prehistorically big power and low weight flood light. Separated driver, easy mounting and maintenance.115000lm to replace Metal Halide 2000w for large facility,such as sprots field, airport, sea port and temple. ...

Come From Shanghai standard lighting limited

Linear LED High Bay Lights, 150W, 140lpw, Meanwell driver, 5 yrs warranty

100 – 277VAC or 277-480AC 150w 140 + LM/W output Silver finish Milky cover IP65 waterproof Replace 400w MH lamp Meanwell driver used Pendent or surface mounted 0-10V DC dimming available Occupancy sensor available UL/cUL certified, CE/ROHS certified DLC premium L70: 50,000 ...

Come From Lightide Manufactory Co., Ltd