MMIC AM204437WM-BM/FM-R
Product Details
DESCRIPTION
AMCOMs AM204437WM-BM-R and AM204437WM-FM-R are part of the GaAs MMIC power amplifier series.
Both MMICs have 30dB gain, 37dBm output power over the 2.2 to 4.2 GHz band. These MMIC are in a ceramic
package with both RF and DC leads at the bottom level of the package to facilitate low-cost SMT assembly to the
PC board. Because of high DC power dissipation, we strongly recommend to mount these devices directly on a
metal heat sink. The FM package is the BM package mounted on a copper flange carrier. There are two screw
holes on the flange to facilitate screwing on to a metal heat sink. Both MMICs are RoHS compliant.
PERFORMANCE* (Vds = 8V, Idq = 1800mA, Vgs** = -0.66V, Ta = 25
- Country:United States
- telephone:1-301-353-8400
| AMCOMs AM204437WM-BM-R and AM204437WM-FM-R are part of the GaAs MMIC power amplifier series. |
Send inquiry / quota request to MMIC AM204437WM-BM/FM-R
Relate products of MMIC AM204437WM-BM/FM-R
Place of Origin:Massachusetts United States RFIC, MMIC, RF and Microwave Front End module, PA, LNA, mixer, Gain block, etc.used in WiFi FEM, WiMax, Zigbee.. ...
Come From ChanCe
INTRODUCTION This application note describes the use and handling of AMCOM's BM MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC Figure 1 ...
Come From AMCOM Communications, Inc.
INTRODUCTION This application note describes the use and handling of AMCOM's BM FET MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC ...
Come From AMCOM Communications, Inc.
