MMIC AM183031WM-BM-R

DESCRIPTION
AMCOMs AM183031WM-BM is part of the GaAs MMIC power amplifier series. It has 31.5 dB gain, 31.5 dBm
output power over the 1.6 to 3.3 GHz band. This MMIC is in a ceramic package with both RF and DC leads at the
bottom level of the package to facilitate low-cost SMT assembly to the PC board. This MMIC is RoHS compliant.
PERFORMANCE* (Vds = 8V, Idq = 670mA, TA = 25

  • Country:United States
  • telephone:1-301-353-8400
AMCOMs AM183031WM-BM is part of the GaAs MMIC power amplifier series.
*Your name:
*Your Email:
*To:AMCOM Communications, Inc.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

RFIC MMIC Thin-film microwave module FEM OEM design, testing , production

Place of Origin:Massachusetts United States RFIC, MMIC, RF and Microwave Front End module, PA, LNA, mixer, Gain block, etc.used in WiFi FEM, WiMax, Zigbee.. ...

Come From ChanCe

MMIC AN700

INTRODUCTION This application note describes the use and handling of AMCOM's BM MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC Figure 1 ...

Come From AMCOM Communications, Inc.

MMIC AN710

INTRODUCTION This application note describes the use and handling of AMCOM's BM FET MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC ...

Come From AMCOM Communications, Inc.