Integrated Circuits

Ph:  98847 92792, 044 23762063
Website: vaseee.com

VASEE ELECTRONICS
PLOT No.2, Nehru Nagar Main Road,   
Saligramam, Ch 93.   

3.   RS232 and USB cable one set and Power Cable 

2.   CD with Keil Demo version Embedded C compiler and Example  Programs

1.   Operational Manual with Example Programs including  Keil RTOS  based    Examples

The Following items will be supplied along with kit :

>  Built in USB port to Communicate with PC with jumper to select USB Port for ISP PROGRAMMING 
>  Built in 9 Pin D type Serial Port for ISP And User Application 
>  Built in 20 Pin FRC connector for Port1(User Interface Port)
>  Built in Stepper Motor Driver with 6 Pin connector  for interfacing  Stepper Motor
>  Built in One Relay  with Molex Connector for Experimental Purpose
>  Built in One PWM port with LED indication (User Interface)
>  Built in One External Interrupt Port for Interrupt Function
>  Built in One DAC port
>  Built in Two Trim pot for ADC Channel Experiment
>  Built in One Temperature Sensor (LM35) (User Temperature Control and  Monitoring Experiment)
>  Built in 3.5V Power Supply
>  Wooden Cabinet

KEIL ULINK ADOPTER 

>  Built in  2x16 Line Liquid Crystal Display
>  Built in 128 x 64 Graphical LCD
>  Built in I2C based 4 digit 1 Seven Segment Display
>  Built in I2C based RTC DS1307
>  Built in I2C Based EEPROM AT24CXX
>  Built in I2C0 and I2C1 port for interfacing I2C cards
>  Built in 4 x 4 Matrix Keypad
>  Built in 8Bit Input Keys and 8Bit Output LEDs
>  Built in JTAG Connector for Debugging program using

BUILT IN PHERIPHERAL DEVICES:

rs, PWM unit, 32 BIT Compare And  
    Capture Unit and Watchdog  Timer
>  On chip Two UARTs, two Fast I2C (400kbit/S),   SPI and SSP
>  Onchip Vectored Interrupt Controller To handle 32 interrupt request 

xi) Built in 4 Pin RMC Connector for I2C1 Port for External Device Interface

x) Built in 4 Pin RMC Connector for I2C0 Port for External Device Interface

ix) Built in 10 Pin FRC Connector for Serial Peripheral Interface (SSP)

viii) Built in 10 Pin FRC Connector for CAPTURE Function (CAP)

vii) Built in 10 Pin FRC Connector for External Interrupt Port (EINT)

vi) Built in 10 Pin FRC Connector for Analog to Digital Converter Port1 (ADC1)

v) Built in 10 Pin FRC Connector for MATCH Function (MAT)

iv) Built in 10 Pin FRC Connector for Pulse Width Modulation (PWM)

iii) Built in 10 Pin FRC Connector for Analog Port of RFID (ANALOG) (Optional)

ii) Built in 20 Pin FRC Connector for PORT1 General Purpose I/O operation

i) Built in 34 Pin FRC Connector for PORT0 General Purpose I/O operation

Built in General Purpose I/O and Special Function Ports:

i) Built in 20 Pin FRC Connector for JTAG Programming (JTAG)

Built in Parallel Communication Port:

iv) One Built in RS 485 Serial Port (RS485 Serial Communication)

iii) One Built in USB Serial Port (only for USB2 Serial Communication)

ii) One Built in USB Serial Port (ISP/ USB1 Serial Communication)

i) One Built in RS232 Serial Port (ISP/ RS232 Serial Communication)

Built in Serial Communication Ports:

ii) One LPC2148 built in Real Time Clock with 3V Battery Backup

i) One LPC2148 built in USB Serial Port (only for USB0 Serial Communication)

LPC2148 Built in Functions:

xix) Built in One 5V DC Motor for DAC/ ADC Operation

xviii) Built in One Reed Switch for CAPTURE Functions

xvii) Built in One Reed Switch for External Interrupt Functions

xvi) Built in Built in one IR Transmitter/ Receiver LED for CAPTURE Functions

xv) Built in one IR Transmitter/ Receiver LED for External Interrupt Functions

xiv) Built in Two Switches for CAPTURE Functions

xiii) Built in Two Switches for External Interrupt Functions

xii) Built in one Light Dependant Resistor (LDR) for ADC0 Port pin

xi) Built in one Temperature Sensor (LM35) for ADC0 Operation

x) Built in 4 Variable Resistance (TRIMPORT) for ADC 0 Operation

ix) Built in Four Switches, Input devices for I2C Port (control through PCF8574)

viii) Built in Two LED, Output devices for I2C Port (control through PCF8574)

vii) Built in Two Relays, Output devices for I2C Port (control through PCF8574)

vi) Built in PCF8574 I2C IC interface with LPC2148

v) One Built in Serial EEPROM

vii) One Built in RTC IC DS1307 with 3V Battery Backup

iv) Built in RFID module for Wireless Communication (Optional)

iii) 4 x 4 Matrix Keypad

ii) 4 digit 1" Seven Segment Display

i) Built in 2x16 Line Liquid Crystal Display

Built in Interface Devices:

xii) Jumpers for select the communication between LPC2148 and USB2 / RFID (optional)

xi) Jumpers for select the 3V or 5V operation for External Interface

x) Two DIP Switches used for select the Built in function or External Operation of CAPTURE and EXTERNAL INTERRUPT

ix) UPLINK LED indication for Built in USB0

viii) Transmit and Reception LED Indication for RS232, USB1 & USB2 Serial Communication

vii) 5V and 3V Power Indication LEDs

vi) JTAG Port for Parallel Programming

v) In System Serial Programming (ISP)

iv) Power On Reset

iii) LM1117 Regulator for 3.2V Operation

ii) 20MHz Operating Frequency

i) LPC2148 ARM7 Central Processing unit

Board Features:

SPECIFICATION:

ARM7 (LPC2148) TDMI S TRAINER KIT

SPECIFICATION: