MMIC AM011037WM-BM/FM-R
Product Details
DESCRIPTION
AMCOMs AM011037WM-BM-R and AM011037WM-FM-R are part of the GaAs pHEMT MMIC power amplifier
series. These high efficiency MMICs are 2-stage GaAs pHEMT power amplifiers biased at +8V. The input and
inter-stage matching networks cover 0.1 to 1GHz. These MMICs require output external matching to your band of
interest between 0.1GHz to 1GHz to provide maximum bandwidth flexibility. As an example, one of the available
evaluation boards has over 30dB gain, 6 watts (38dBm) saturated output power over the 0.2 to 0.3GHz band. The
BM package RF and DC leads are coplanar with the bottom level of the package, which serves as ground, to
facilitate low-cost SMT assembly to the PC board. Because of high DC power dissipation, we strongly recommend
to mount this device directly on a metal heat sink. The FM package is the BM package mounted on a copper flange
carrier. There are two screw holes on the flange to facilitate screwing on to a metal heat sink. Both MMICs are RoHS
compliant.
TYPICAL PERFORMANCE*
a) TEST BOARD FOR 0.2 to 0.3 GHz
Performance at Vdd = +8V, , Vgs=-0.66V**, Idq = 1.4A, Ta = 25
- Country:United States
- telephone:1-301-353-8400
| AMCOMs AM011037WM-BM-R and AM011037WM-FM-R are part of the GaAs pHEMT MMIC power amplifier |
Send inquiry / quota request to MMIC AM011037WM-BM/FM-R
Relate products of MMIC AM011037WM-BM/FM-R
Place of Origin:Massachusetts United States RFIC, MMIC, RF and Microwave Front End module, PA, LNA, mixer, Gain block, etc.used in WiFi FEM, WiMax, Zigbee.. ...
Come From ChanCe
INTRODUCTION This application note describes the use and handling of AMCOM's BM MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC Figure 1 ...
Come From AMCOM Communications, Inc.
INTRODUCTION This application note describes the use and handling of AMCOM's BM FET MMIC power amplifiers. The amplifiers are housed in a 10-pin low cost surface mountable, ceramic package. The MMIC can be handled by standard pick and place equipment. ELECTRICAL SCHEMATIC ...
Come From AMCOM Communications, Inc.
