M86-01 8086/8088 MICROPROCESSOR TRAINING KIT
Product Details
- 8086/8088 CPU operating at 2.5/5MHz
- 8086 Processor can be replaced by 8088 Processor
- On-board sockets provided to facilitate the use of 8087 Co-processor and 8089 I/O Processor
- 16K bytes of RAM using two nos. of 6264 with Battery Backup expandable up to 256KB.
- 16K bytes of powerful monitor EPROM using two nos. of 27512
- 72 I/O lines through 3 nos. of 8255 brought at 26 Pins FRC Connector to interface with IC-XX Series.
- 16 bit Timer/Counter through 8253 brought out at 20 Pins FRC Connector.
- RS-232C interface using 8251 brought out at 9 Pins D-Type Connector.
- On-board Interrupt controller using 8259 brought out at 20 Pins FRC Connector.
- 28 keys hexadecimal keyboard and eight seven segment display using 8279
- Two modes of operation:
- Keyboard Mode
- Serial Mode
- Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move can be used through hex keyboard or PC serial mode.
- Facility for Downloading/Uploading files from/to PC.
- All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- In-Built Power Supply of +5V/2A,
- Country:India
- telephone:91-91-22-6511-6548
| 8086/8088 CPU operating at 2.5/5MHz |
Send inquiry / quota request to M86-01 8086/8088 MICROPROCESSOR TRAINING KIT
Relate products of M86-01 8086/8088 MICROPROCESSOR TRAINING KIT
* 8085 CPU * LCD display, Printer Interface (optional), EPROM Programmer for 27 series, Assembler/Disassmber, Relay, Opto, ADDA ...
Come From Vinytics Peripherals Pvt Ltd
Based on 8085 CPU operating at 6.144 MHz. 8K bytes of Powerful Monitor Program using 27512 EPROM 8K bytes of RAM using 6264 with Battery Backup using NICD Battery. On-board one memory expansion up to 56KB. Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC ...
Come From Kitek Technologies Pvt. Ltd
Based on 8085 CPU operating at 6.144 MHz. 8K bytes of Powerful Monitor Program using 27512 EPROM 8K bytes of RAM using 6264 with Battery Backup using NICD Battery. On-board one memory expansion up to 56KB. Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC ...
Come From Kitek Technologies Pvt. Ltd
