M85-07 8085 ADVANCE MICROPROCESSOR TRAINING KIT (LCD ver.)
Product Details
- Based on 8085 CPU operating at 6.144 MHz.
- 8K bytes of Powerful Monitor Program using 27512 EPROM
- 8K bytes of RAM using 6264 with Battery Backup using NICD Battery.
- On-board one memory expansion up to 56KB.
- Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC Connector.
- 48 I/O lines provided using 8255 brought out at 26 Pins FRC Connector to interface with IC-XX Series.
- RS-232C interface through SID/SOD lines brought out on a 9-Pin D- Type connector.
- Two mode of commands:
- ASCII Key pad Mode
- Serial Mode
>20x2 Alphanumeric LCD Display with Backlite. - 101 ASCII Keyboard interface using 89C2051 operating @ 12MHz.
- On-board EPROM Programmer for 27 series viz. 2716, 2732, 2764, 27128, 27256, 27512.
- On-board Printer Interface provided on 25 pin D-Type Connector to interface with DOT MATRIX Printer.
- On-board Interrupt Controller using 8259 terminated on 26 pin FRC Connector.
- On-board USART using 8251 terminated on a 9 pin D-Type Connector.
- On-board 1 Channel SPDT Relay terminated on a 10 pin FRC Connector.
- On-board 1 Channel Opto Coupler using MCT2E terminated on 10 pin FRC Connector.
- On-board 8 Channel 8 bit ADC using ADC0809 terminated on 26 pin FRC Connector.
- On-board 1 Channel 8 bit D/A using DAC0800 terminated on 26pin FRC Connector.
- On-board Speaker Interface brought out on 2mm banana connector.
- Powerful Commands like Examine/Edit Memory, Examine/Edit Register, Single stepping, Execution, Block Move, Insert Data, Delete Data can be used through ASCII keyboard or PC serial mode.
- On Board Single Line Assembler / Disassembler
- Facility for Downloading/Uploading files from/to PC.
- All address, data & control lines are available on KXT Bus 50 pin FRC Connector to interface with SC-XX Series.
- All ICS are mounted on IC Sockets.
- Bare board Tested Glass Epoxy SMOBC PCB is used.
- In-Built Power Supply of +5V/2A,
- Country:India
- telephone:91-91-22-6511-6548
| Based on 8085 CPU operating at 6.144 MHz. |
Send inquiry / quota request to M85-07 8085 ADVANCE MICROPROCESSOR TRAINING KIT (LCD ver.)
Relate products of M85-07 8085 ADVANCE MICROPROCESSOR TRAINING KIT (LCD ver.)
* 8085 CPU * LCD display, Printer Interface (optional), EPROM Programmer for 27 series, Assembler/Disassmber, Relay, Opto, ADDA ...
Come From Vinytics Peripherals Pvt Ltd
Based on 8085 CPU operating at 6.144 MHz. 8K bytes of Powerful Monitor Program using 27512 EPROM 8K bytes of RAM using 6264 with Battery Backup using NICD Battery. On-board one memory expansion up to 56KB. Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC ...
Come From Kitek Technologies Pvt. Ltd
Based on 8085 CPU operating at 6.144 MHz. 8K bytes of Powerful Monitor Program using 27512 EPROM 8K bytes of RAM using 6264 with Battery Backup using NICD Battery. On-board one memory expansion up to 56KB. Three Channel Timer/Counter using 8253 brought out at 10 Pins FRC ...
Come From Kitek Technologies Pvt. Ltd
