load module

The TTLM I/O load module is designed for critical force measurement applications where accuracy, extreme stability, and dependable noise rejection is essential. The signal conditioner is a load measurement device. The TTLM is used as an analog output (+/- 10 VDC), from a peak hold circuit, to be used with PLCs and other data acquisition systems. These systems will provide the display and alarm control functions.The TTLM has high sensitivity levels that work well in an electrically "noisy" environment. It has two amplifier gain ranges (span ranges) and can accept either weak or strong signals from the load sensor.The TTLM module is available either in an AC version [customer selectable between110V and 220V] or a 24 VDC version, depending on the power source the customer wishes to use. The 24 VDC version is certified to be in conformance with European CE standards. Either version is available in one, two or four channels.Signal conditioning module for strain gage sensors & load cellsFour independent channels for accommodating up to eight sensorsUses full-bridge sensors from 120 Ohms to 1,000 OhmsPlug-in connectors are used for the sensor inputsHigh/low sensitivity span ranges selected with front panel switchPower input/output are plug-in connectorsBuilt-in automatic peak load memory circuitsPeak measurements are made with an external trigger deviceBuilt-in power supply for stable operation and noise rejectionCompact size to fit almost any locationSteel enclosure for maximum protection and noise rejectionFrom one to eight sensor inputs, one or two per channelAnalog output terminals