LCD Module

4-line display PCB (outside edge) measures 98mm wide and 60mm high

5-volt operation with less than 5mA current consumption (backlight off)

Fast bargraph displays (up to the full width of the display) can be anchored on the left side or right side.  Fast enough to display stereo audio levels!

Onboard non-volatile memory allows you to save custom messages and then recall/display them with a short command.

Built-in special functions include scroll up, scroll down, set backlight, select line, display bargraph, cursor appearance, change I2C address, save/recall strings.

Use standard commands compatible with Hitachi HD44780 or our easy-to-understand special protocol to control the display

User-programmable boot screen memory allows a custom message to be displayed on power up.

80-character buffered communication.

Change I²C slave address via jumpers or with a software command.

Synchronous serial I²C input up to 400K bps.

Compatible with both RS-232 (+/- 12V) and TTL (0-5V) levels.

Jumper-selectable input inversion for use with either True Mode or Inverted Mode Serial.  Connect directly to a PC serial port or to an output pin on a  microcontroller.

Asynchronous serial supported at baud rates of  2400, 9600, 19200, and a blistering 57600. (jumper selectable)

Software-controlled, variable backlight (Off to Full Brightness in 256 steps).

The display includes an LED backlight with variable brightness. The serial LCD board is also available separately for use with other displays that utilize a Hitachi HD44780 or equivalent controller IC.

	Volume Pricing

QuantityPrice Each 1-9 $49.95 10-24 $45.00 25-99 $40.00 100+ $35.00

The melabs Serial LCD (SLCD) can display serial data from either asynchronous RS232-style or synchronous I²C input. A range of baud rates from 2400 to 57,600 are available and the serial data is buffered so that no delay is necessary when transmitting data to the SLCD.