TAKT Real Time Target Board

1. Display in red LED's
2. FND LED's in 7 segment formation
3. Height of LED's 4"
4. The functioning of the board is as follows:
   1. Board has 24 user programmable breaks
   2. Each break time is to be programmed into the board memory using a Handheld remote.
      1. The board will have a Real Time clock at the top with a 1.0" FND Display
      2. While entering the break timings the First Two digits of the clock become the BREAK NUMBER
      3. The other four digits become the relevant BREAK BEGIN / BREAK END time.
      4. Once the entering / edit of the break timing is done, the clock function is displayed on the digits
   3. HIDDEN VALUE - Cycle Time is keyed in using Target Window - ( The Shift number is keyed in first followed by cycle time using the Hand held IR remote.)
   4. Total Target is automatically calculated by the system - This is calculated as follows - Total time available during the shift less total of all break timings.
   5. HIDDEN VALUE - Real Time Target increments once per completion of Cycle Time - However the incrementing is not done during the pre-programmed breaks provided by the user.
   6. Actual Production is incremented once per Potential Free contact
   7. Size of casing approx 24" high x 24" wide (approx)
   8. Outer casing in aluminium frames and powder coated in black colour
   9. Top covering in red perspex sheet
   10. Composing of titles with vinyl stickers
   11. Press of a button on the IR clears all fields
   12. MEMORY FOR CYCLE TIME, RTT, RTA AVAILABLE ON BOARD
   13. Reset of Cycle time is possible at the end of each shift. Resetting cycle time resets board and clears data.

TAKT LED board-calculating the Real Time Target, Real Time Actual and Total Target for the Shift