CR Series - Carbon Resistors

CR Series - Carbon Resistors
  • - Light Dependent Resistor (LDR), Photo Resistors (CDS)
  • - Metal Film, Wirewound, Cement Fusible Resistors
  • - Non-Corrosive Cement Resistors
  • - High Precision Wirewound Axial Moulded Resistors
  • - Precision Power Wirewound Resistors
  • - Vitreous Enamel Coated Wirewound Resistors
  • - Wirewound Low-Inductance Resistors
  • - Zero Ohm and Jumper Wire Resistors
  • - Carbon Composition Resistors
  • - Cement Resistors with Thermal Cut-offs
  • - Metal Film Precision Resistors
  • - Metal Oxide Resistors
  • - Anti-Surge Resistors
  • RESISTORS - TECHNICAL STANDARDS AND USAGE METHODS

CR Series are the earliest and a still popular type made by breaking down hydrocarbon gases at high temperature in a vacuum to form a carbonic deposit on the surface of a cylindrical substrate. Trimming to value is accomplished by the cutting of spiral grooves. The material is painted on the substrate in a spiral pattern and cured at a moderately elevated temperature. Token offers competitive prices and widely used in the electronics, and consumer electrical industries.

General Specifications
Type RD Power Rating Dimension (mm) Maximum
Working
Voltage
Maximum
Overload
Voltage
Resistance Tolerance
RD RDS L D H d
  • Country:Taiwan
  • telephone:886-886-2-29810109
Light Dependent Resistor (LDR), Photo Resistors (CDS)
- Metal Film, Wirewound, Cement Fusible Resistors
*Your name:
*Your Email:
*To:Direct Electronics Tech. Co., Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

CA Series-770CA30 PEEK Carbon Fiber Reinforcement

CA Series-770CA30 carbon fiber filled PEEK reinforcement is widely used in automobile and aviation fields. It is widely used in automobile fuel pump and gearbox. It can help equipment reduce weight, reduce noise and increase the service life of wear-resistant parts, reduce or ...

Come From Jilin Joinature Polymer Co.,Ltd.

CA Series-550CA30 PEEK Carbon Fiber Reinforcement

CA Series-550CA30 PEEK carbon fiber reinforcement is a 30% carbon fiber reinforced PEEK plastic material, the addition of carbon fiber significantly increased the material\'s wear resistance and high temperature mechanical strength, thermal conductivity is pure resin G series 3 ...

Come From Jilin Joinature Polymer Co.,Ltd.

CA Series-330CA30 PEEK Carbon Fiber Reinforcement

CA Series-330CA30 PEEK FC, CF PEEK carbon fiber reinforcement is suitable for the production of bushing seals and other products, can be faster from the bearing surface heat dissipation, at the same time has a high thermal deformation temperature (336 ° C) , also can maintain ...

Come From Jilin Joinature Polymer Co.,Ltd.