Model 104 High Megohm Tubular Resistor With Leads

Model 104 incorporates an
ELTEC Model 112 chip resistor
element (with nickel ribbon
leads) encapsulated within a
ceramic sleeve with epoxy.
Resistor performance is identical
to leaded resistor Model
102 except shunt capacitance
is slightly higher. The epoxy is
highly moisture resistant and
qualifies for use in a vacuum
to 10-7 torr (satisfactory operation
at 10-9 reported). The
Model 104 is suggested in
situations where its larger size
makes it easier to handle.
Applications:
High Impedance Load
Resistors
Low Noise, High Gain
Feedback Resistors
Low Current Biological &
Medical Instrumentation
Photon Infrared Detectors
Piezoelectric
Accelerometers
Hydrophone
Preamplifiers
Electret Microphones
Telecommunications
Line Station Monitoring
SPECIFICATIONS
Tolerance: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1X106 to 9X109

  • Country:Switzerland
  • telephone:41-41-44-926-43-62
Model 104 incorporates an
ELTEC Model 112 chip resistor
element
*Your name:
*Your Email:
*To:Silverlight Ltd.
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

Model 102 High Megohm Chip Resistor With Leads

Model 102 incorporates an ELTEC Model 112 chip resistor element with nickel ribbon leads soldered to the terminals. These leads permit connection by soldering or spotwelding. The Model 102 permits the use of ELTEC miniature chip resistors by those who do not have the bonding ...

Come From Silverlight Ltd.

Model 112 High Megohm Miniature Chip Resistor

Model 112 High Megohm Miniature Chip Resistor has thick film platinum/gold terminals fired to one side of a ceramic chip at about 900oC. The resistive glass does not contain any organic materials and is applied as a continuous film so exposure in hard vacuum environments will ...

Come From Silverlight Ltd.