PRECISION RESISTORS

High precision matched pair SIP resistor networks utilizing NiCr thin film spattered onto an aluminasubstrates using high density patterning technologies. These models exhibit 1ppm 0.05%, tight ratiotolerance and TC tracking (2T series). The 2S and 2M models are economical and show good performance.A large variety of quick delivery resistances are available. The 2.5mm width and 5mm height is ideal forhigh density layouts. Application for 2S(wide) include: Voltage dividers, feed back resistors, voltagereference circuit in data processing, data transmission, precision power sources of industrial controls,medical, measurements. GENERAL SPECIFICATIONSModel Resistance [ & ] Tolerance TCR R1,#2-#3 R2,#1-#2 Absolute Ratio Absolute Tracking 2M-01, 2S-01 1K 1K +-1% 0.1% +-25ppm 5ppm 2M-02, 2S-02 1K 10K 2M-03, 2S-03 10K 10K 2M-04, 2S-04 10K 20K 2M-05, 2S-05 20K 20K 2M-06, 2S-06 15K 15K 2M-07, 2S-07 30K 30K 2M-08, 2S-08 3K 680 2M-09, 2S-09 2.2K 10K 2M-10, 2S-10 50K 50K 2M-11, 2S-11 30K 10K 2M-12, 2S-12 60K 20K 2M-13, 2S-13 18K 2K 2M-14, 2S-14 1K 3K 2M-15, 2S-15 1K 9K 2M-17, 2S-17 3K 6K 2M-18, 2S-18 2K 10K 2T-01 1K 1K +-0.1% 0.05% +-5ppm 1ppm 2T-02 1K 10K 2T-03 10K 10K 2T-04 10K 20K 2T-05 20K 20K 2T-06 15K 15K 2T-07 30K 30K 2T-08 3K 680 2T-09 2.2K 10K 2T-10 50K 50K 2T-11 30K 10K 2T-12 60K 20K 2T-13 18K 2K 2T-14 1K 3K 2T-15 1K 9K 2T-17 3K 6K 2T-18 2K 10 PIN CONFIGURATIONCHARACTERISTICS Values in [ ] mean change in ohmic value after test Test Conditions Rating Power /element 125Mw, 250mW/Package Rated Ambient Temp. 70 C Operating temp. Range -55 C to +120C Max. Applied Voltage 100V In accordance with E=Root(PR) Short Time Overload +- [0.1 %+0.01&] 2.5 times rated power, 5sec Load Life +- [0.1 %+0.0&] 70 C , 90min ON, 30min OFF, 1000hrs Humidity +- [0. 25 %+0.0&] 60 C , 90-95RH, DC 0.1W, 1,000hrs Soldering Heat +- [0.1 %+0.01&] 350 C , 3sec Withstanding Voltage +- [0.1 %+0.01&] 1000VAC, 60sec Insulation Resistance 10,000M& DIMENSIONS 2T 2S 2M A 8.0max. B 5.0max. 5.0max. 7.0max. C 2.54max. D 3.3 E 0.25 F 1.2 G 0.5 H 2.54 ORDERING PROCEDURE EXAMPLE