Printed Circuit Board

SINGLE-SIDE: Laminate: FR-4PCB Thickness: 1. 6 mm / 2. 4mm / 3. 2mmStart Copper Thickness: 17. 5 Microns / 35 Microns / 70 micronsMin. Track Width / Spacing: 0. 2 / 0. 17mm (8 Mils / 7 Mils) Min. Hole: 0. 40mm (16 Mils) FINISHMin. Smd Pitch: 0. 5mm (20 Mils) Solder mask: GreenSurface Finish: Immersion Silver / Electroless Nickel Immersion GoldLegend: WhiteSpecial Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on requestDOUBLE-SIDE: Laminate: FR-4PCB Thickness: 1. 6mm / 2. 4mm / 3. 2mmStart Copper Thickness: 17. 5 Microns / 35 Microns / 70 micronsMin. Track Width / Spacing: 0. 2 / 0. 17mm (8 Mils / 7 Mils) Min. Hole: 0. 30mmn (12 Mils)  (FINISH) SMD Pitch: 0. 50mm (20 Mils) Solder mask: GreenSurface Finish: Immersion Silver / Electroless Nickel Immersion GoldLegend: WhiteSpecial Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. Routing: Simple routing with 2. 4 mm (0. 094") routerHoles in the ground area shall be PTH only. ML-4: Laminate: FR-4PCB Thickness: 1. 6 mm / 2. 4mm / 3. 2mmStart Copper Thickness: 17. 5 microns / 35 microns / 70 micronsMin. Track Width / Spacing: 0. 2 / 0. 17mm (8 Mils / 7 Mils) Min. Hole: 0. 30mm (12 Mils)  (FINISH) SMD Pitch: 0. 50mm (20 Mils) Inner Clearance: 0. 35mm (14 Mils) Solder mask: GreenSurface Finish: Immersion Silver / Electroless Nickel Immersion GoldLegend: WhiteSpecial Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. Routing: Simple routing with 2. 4 mm (0. 094") routerHoles in the ground area shall be PTH only. ML-6: Laminate: FR-4PCB Thickness: 1. 6 mm / 2. 4mm / 3. 2mmStart Copper Thickness: 17. 5 microns / 35 microns / 70 micronsMin. Track Width / Spacing: 0. 2 / 0. 17mm (8 Mils / 7 Mils) Min. Hole: 0. 30mm (12 Mils)  (FINISH) SMD Pitch: 0. 50mm (20 Mils) Inner Clearance: 0. 40mm (16 Mils) Solder mask: GreenSurface Finish: Immersion Silver / Electroless Nickel Immersion Gold. Legend: WhiteSpecial Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. Routing: Simple routing with 2. 4 mm (0. 094") routerHoles in the ground area shall be PTH only. ML-8: Laminate: FR-4PCB Thickness: 1. 6 mm / 2. 4mm / 3. 2mmStart Copper Thickness: 17. 5 microns / 35 microns / 70 micronsMin. Track Width / Spacing: 0. 2 / 0. 17mm (8 Mils / 7 Mils) Min. Hole: 0. 30mm (12 Mils)  (FINISH) SMD Pitch: 0. 50mm (20 Mils) Inner Clearance: 0. 4mm (16 Mils) Solder mask: GreenSurface Finish: Immersion Silver / Electroless Nickel Immersion Gold. Legend: WhiteSpecial Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. Routing: Simple routing with 2. 4 mm (0. 094") routerHoles in the ground area shall be PTH only. ML-10: Laminate: FR-4PCB Thickness: 1. 6 mm / 2. 4mm / 3. 2mmStart Copper Thickness: 17. 5 microns / 35 microns / 70 micronsMin. Track Width / Spacing: 0. 20 / 0. 17mm (8 Mils / 7 Mils) Min. Hole: 0. 30mm (12 Mils)  (FINISH) SMD Pitch: 0. 50mm (20 mils) Inner Clearance: 0. 40mm (16 Mils) Solder mask: GreenSurface Finish: Immersion Silver / Electroless Nickel Immersion Gold. Legend: WhiteSpecial Requirements: Slots, Cut outs, Carbon contacts and peel off can be provided on request. Routing: Simple routing with 2. 4 mm (0. 094") routerHoles in the ground area shall be PTH only. General note: only single design per order is acceptable. Blind / Burried via orders are not accepted.