Temperature transmitter with very compact physical dimensions available in brass or stainless steel various cable connectors. One parameter to minimize the operating cost of hydraulic and lube systems is to prolong the life of the fluid itself. The continuous and precise control of fluid temperature within an acceptable span contributes significantly to this objective. Modern process control systems cope with this problem by regulating the operating temperature within a narrow span if they receive precise signals with a low response time. The Thermolog transmitter measures the temperature and responds to changes quickly and accurately. Changes are output using a 4 to 20 mA signal suitable for many controllers. The Thermolog MK2 can be mounted to the tank top the tank wall fitted into pipework by means of a standard tube fitting. The unit consists of two modules which can be separated from each other. The ?wet? part remains at the reservoir whereas the ?dry? part can be removed for inspection. This eliminates the need to drain the reservoir or pipework for maintenance. A DIN or a M12 cable connector is available optional. The sensor is available in either brass or stainless steel.
Temperature transmitter with very compact physical dimensions available in brass or stainless steel various cable connectors. On |
The TF range of sensors are available with housing made from brass or stainless steel. The connector and RTD form an integral unit which may be removed without disturbing the housing. The TF is compatible with our Thermotronic range as well as many other controllers that accept ...
Come From AC Fluid Technology