Sell standard signal isolator
Product Details
Power supply: +24V+/-10%
Isolation voltage: 2500V DC
Response time: 200mS
Double output: 250ppm/C
output: 150ppm/C,
Double output: 0.5%
Accuracy: Single output: 0.2%,
Load capability: 300Ohm,
Output: 4-20mA DC and 0-5V DC(or 1-5V DC)
Power output: 24V+/-3V, 25mA
Input: 4-20mA DC
The device is a standard signal isolator with a 24V DC power output. It works on high-linearity analog optocoupler principle. The device converts 4-20mA DC current into 4-20mA DC current or 0-5v(or 1-5V) DC voltage with single output or double outputs. Meanwhile, it supplies an isolated 24V DC power to the input section. The input, outputs and power supply are electrically isolated from each other. The unit features in their high accuracy, high isolation, low drift and wide range of operation temperature. They can well avoid the common-mode noise and power line interference generated during the transmission of signals from transducers or instruments.
- Country:China (Mainland)
- telephone:86-755-83766915
| The device is a standard signal isolator with a 24V DC power output. It works on high-linearity anal |
Send inquiry / quota request to Sell standard signal isolator
Relate products of Sell standard signal isolator
What Is Signal Isolator? Ⅰ. Introduction of signal isolators Signal isolator adopts a linear optocoupler isolation principle that converts input signals into output signals. Input, output and working power sources are isolated from each other, which is especially suitable for ...
Come From Shanghai Chenzhu Instrument Co., Ltd.
BL200 is compact and small distributed Modbus IO coupler which widely used in industrial site. It adopts embedded hardware, the main frequency is 380mhz, it is based on Linux OS, and it adopts the dual network port technology of unique MAC layer data exchange technology to ...
Come From BLIIOT
Mornsun analog isolator isolate the electrical devices which connect the instruments in industrial fields with the control room. They isolate between the input power and output power, input signal and output signal, effectively reducing the interferences in automatic control ...
