Weight Measurement Load Cell
Product Details
The Weight Measurement Kit makes building a robust and accurate weight measurement system a breeze. Simply connect up all the components of the kit, add a platform, and you are ready to start taking readings.
Power Adapter (1)
A 9V power adapter
Cables (4)
Four data cables are included to connect the load cells to the hub.
LoadVUE Software (1)
Loadstars LoadVUE software permits you to perform nine-point calibration on attached load cells, curve-fit data from the load cells, display individual loads plus
the sum of all loads, and log data on screen and to a file.
Wired 4-port USB Hub (1)
Connect your four iLoad Digital USB Load Cells to a powered wired USB Hub. With Loadstar Sensors Plug and Sense Simplicity you're immediately connected to your PC and ready to focus on your weight
measurements.
iLoad Digital USB or iLoad Pro Digital USB Series Load Cells (4)
Choose four iLoad Digital USB or iLoad Pro Digital USB load cells of any one capacity. The iLoad Series is the only load cell of its kind which has signal conditioning electronics
built into the load cell, and does not need specialized external equipment for output measurement. The load cell is rugged and provides high reliability as well as
space-saving benefits to product designers. It mounts easily using commonly available fixtures. The load cells are factory calibrated right out of the box.
| Load Cell Comparison | ||
| iLoad | iLoad Pro | |
| Diameter | 3 in. | 3.25 in. - 5 in. |
| Height | 0.5 in. | 0.66-0.90 in. |
| Capacity | 10-500 lb. | 10-10,000 lb. |
| Mounting | Female or Male Stud | Robust Female 0.5 in. threaded boss |
| Cabling | Removable USB | Cable Strain Relief |
Loadstar Sensors' weight measurement kit is a pre-packaged solution for weight measurement that includes the following components:
- Country:United States
- telephone:1-510-623-9600
|
iLoad iLoad Pro Diameter 3 in. 3.25 in. - 5 in. |
Send inquiry / quota request to Weight Measurement Load Cell
Relate products of Weight Measurement Load Cell
TCHS load cell signal high speed collector is used to capture very short instantaneous force, the highest frequency can reach 3500 times per second, suitable for continuous force measurement, instant force measurement, impact force testing and other test occasions. 1. The load ...
Come From Anhui Tianguang Sensor Co.,Ltd
Digital modules are used to transform traditional analog sensors into digital sensors. Support Modbus RTU protocol, support TG ONE data acquisition management software, support customer custom communication protocol. Specification of Load Cell Digital Module Technical Parameter ...
Come From Anhui Tianguang Sensor Co.,Ltd
The weighing amplifier/transmitter is a signal amplification device. Usually used in conjunction with a sensor, the load cell sensor amplifier can convert the mV signal output by the load cell into an analog current/voltage signal or a digital signal to output to the back-end ...
Come From Anhui Tianguang Sensor Co.,Ltd
