Capacitive Sensor

Non-Contact Height Sensor for Plasma and Oxy Fuel CutterOur torch capacitive height sensor with control unit can be fitted or retrofitted to any CNC Plasma or Flame Cutters. Key BenefitsNon Contact, High Sensitive. Height Adjustable "External" and Gap (Window) Adjustable "Internal". UP , DOWN, Outputs Up to 24V 3A. ERROR output for Crash Detection and Short/Open Sensor Head. Four LED display shows UP, DOWN, Sensor Disconnect, Sensor Cable Short or Touch to Work Plate. Perfect Solution for Flame Cutters. Advantage for Plasma Cutters:Can be used as a IHS (Initial Height Sensing) for plasma cutters with voltage controlled height control systems such as Torchmate(TM) or Animatics Smart Motor users and Campbell Designs(TM) TC300 with Mach2 and Mach3 Ohmic sensing is a problem on rusty materials. Cap01 is not need to touch. Due to non-contact operation, saves several seconds on each cut, allowing more cuts per hour. Allows the arc voltage control to be disabled while cutting. Prevents the torch from diving into workpiece during corners or when initially piercing heavy plate. Also use as a Limit Switch and Crash / Collision Detector for torch head General:Aluminium Die Cast Sealed box meet IP65 and Nema4. Replaceable Sensing Ring. Easy mount. New..... Cap01-PWM PWM Outputs, can be used with H-Bridge7 Proportional with height, smooth operation Continuously monitoring the Torch height.