wireless infrared detector with direction

Detecting distance: 9-16m
Detecting angle: 15 degrees
Transmitting freq.: 315MHz or 433MHz, or 868MHZ.
Transmitting distance: 80m (in the open area)
Dimension: 110*69.5*40mm

Operating voltage: 2*1.5V (2*AA battery)
Standby current: less than 12uA
Alarm current: less than 15mA
Operating temp. -10 to +50 degrees
Installation mode: wall mounted
Installation height: 1.2m2.4m(Wall-mounted) /2.54m(ceiling-mounted)

Parameter:

4, not assemble in outdoor side, it is just for indoor

3, not face the air-conditioner or refrigerator, and other code/hot source.

2, not face the big metal

1, not face the sunlight

PIR detectors are used for detecting people if someone moves within in a certain place. Fix it on the wall or ceiling, height1.2m2.4m(Wall-mounted) /2.54m(ceiling-mounted), and you should adjust the position to make it face to the defense zone. For the PIR detector, pay attention:

Installation of curtain PIR detectors

5, to open the cover, you can use the tweezers to open the cover near the antenna.

4, to set the time to trigger, you can see the 5S, 20S, 3MIN on the board, users can jump the jumpers to adjust the time, and the original time is 5S.

3, to set the distance, you can see the 2-6m, 4-8m, 8-16m on the board, users can jump the jumpers to adjust the distance according to you.

When there is low battery, two LED will be on at same time, the users can change the battery in time.

Remark: the color can be green or red when alarming, the point is to see if the LED is on or to glitter.

2, to judge the PIR detector is alarming or not, if the LED is glittering, it is not alarming, if the LED is on for some time, about 1-2 seconds, to mean it is alarming, no matter the LED color is green or red. So the owners can jump the JP4s jumper, to be up or down, to have the right direction to alarm.

1, to see the LED color, there are two LED, one is green, and another is red. You can see the JP4s jumper, it can be down or up.

9, Low power consumption, built-in big capacity batteries, with special low-power mode, ultra-long working hours.

8, High sensitivity, accurate detection, fine workmanship, low false alarm.

7, Reliable performance with tamper supervised, low-voltage check and status report function

6, Excellent EMI-/RFI-protection with multiple shielding technology

5, Excellent interference protection with advanced digital filter circuit

4, Digital Auto temperature compensation and energy analysis

3, Adopts self-designed MASK chip with DMT technology

2, with intelligent direction recognition technology and optional intrusion direction

1, Adopts imported dual PIR and curtain style FRESNEL lens, optimum energy-receiving efficiency.

Features:

To alarm in one way, not alarm in another way

 wireless  infrared detector with direction , curtain detector with direction

wireless infrared detector with direction, curtain pir detector, to alarm in one way, not alarm in another way, curtain detector