Wireless shock sensor/vibration sensor

The sensor is better than door contact and directional pir, as it does not to pay attention to angle when installing, you can place it randomly, very flexiable

When installing it on the window, make it alarm when the window moves about 20cm.

     Pay attention to test when alarming: e.g. when installing it on the door, after that, knock the door, adjust the senstivity, mimic the normal knocking, make sure it would not alarm. Make it alarm when knocking it voilently

Note: It can not be installed where vibration often occurs

2.       when installing on the window, it can alarm when the intruder moves or break the window

1.       when installin on the door, The vibration sensor can alarm before intruder break in, while the door contact alarm after that,

Installing and testing: how to reduce the false alarm, advantage over door contact and directional pir

Note: The wireless senor has got a unique power-saving function, After 3 successive time triggering, it will stop working. Only after confirming that there is no vibration, shock or impact for 70 seconds continuously, the detector will then start working again.

6. The Low Battery Voltage transmitting

5. sensitivity adjustable

b.       Use the double adhesive tape to simply gule it to desire place

a.       Use the screw to fix it to desired place

4. Installation (2 ways)

c. Triggering the vibration sensor by knocking on/beside to the unit (you can also press the tamper button on the main board) the LED will flash (transmiting signal), the panel receive the sensors siganl, select zone then store it. The vibration sensor can communicate to that panel now.

b. Program the panel to leaning status

a. Open the sensor, take out the insulating sheet beside the battery. The sensor can work normally then.

3. Program the vibration sensor to the panel

Timing resistor: 4.7M

Operating Currency: 20mA(alarming), 60

Wireless shock/vibration sensor: work with wireless alaarm system, detect shock/vibration, sensitivity adjustable and CPU inside