RFID Medical Sensor (Fall Detection)
Product Details
| Specifications (ODM/OEM welcome) | |
| This medical sensor is to be used with active reader, model: AR245M | |
| 2G sensor technology (x/y axis) | |
| 1.5G sensitivity (z axis) | |
| Panic button design | |
| Signal | RS232 I-O port Support RX, TX ,GROUND |
| Light weighted, easy to carry | |
| Communication | 2.45G, one direction (to AR245M) |
| Frequency | 2.40~2.48GHz |
| LED Light | Indicates the reading status |
| Parameters | ID(1-255),User Data(256 Bytes) |
| Working Distance | 20M |
| *specification subject to change without notice |
- Country:Taiwan
- telephone:886-4-22350522
| wireless fall sensor by 2. 45Ghz technology |
Send inquiry / quota request to RFID Medical Sensor (Fall Detection)
Relate products of RFID Medical Sensor (Fall Detection)
QC102 NDIR infrared carbon dioxide sensor is a common type, small size sensor, using non-dispersive infrared (NDIR) principle to detect the existence of CO2 in the air, with good selectivity, non-oxygen dependent and long life. Built-in temperature compensation; and it has UART ...
Come From Shenzhen Temp-sen sensor Co., LTD
1 x XIAOMI iHealth PT-101B Thermometer 1. Normal working conditions: a. environment temperature range : 10°C ~ 30°C, storage temperature range: -10°C ~ -40°C b. relative humidity: no more than 90% c. Power supply: 1.5V x 2PCS AAA batteries, NOT Included 2. Dimension: ...
Come From FuKang
TS418-1N426 Thermopile Infrared SensorCIFICATIONS • Thermopile IR-Sensor • Filter for NDIR CO2 Gas Detection • Single Element • Very High Signal • Flat Filter • Small Package • Accurate Reference Sensor TS418-1N426 Thermopile Infrared Sensor DESCRIPTION ...
Come From ISweek company
Input Voltage:DC9-16V Operating Current: not more than20mA (DC12V) Working Temperature:-10 Celsius- +55 Celsius Installation Method: Ceiling mounted Installation Height: 2.5-6m Detecting Angle: 360 degree Detecting Distance:Dia.8m(at 3.6m installation height) Pulse Count: 1st ...
Brief introduction: Medical sterilization cabinet detection temperature probe PT100 platinum thermal resistance components as a temperature sensor, its working principle is the role of temperature, platinum resistance wire resistance with the temperature changes. The ...
Come From HCK Technology Company Limited
MTCS2601 silicon sensing die in SMD ceramic package The MTCS2601 sensors consist of a micro-machined thermal conductivity sensor using four Ni-Pt resistors realized using MEMS technologies. The sensor is mounted in a miniature SMD package, available on tape and real. This MEMS ...
Come From ISweek company
Original M-04 Medical oxygen sensor Original M-04 Medical oxygen sensor Original M-04 Medical oxygen sensor Original M-04 Medical oxygen sensor Original M-04 Medical oxygen sensor Original M-04 Medical oxygen sensor Original M-04 Medical oxygen sensor Original M-04 Medical ...
Come From Shenzhen UpnMed Equipment Co.,Ltd
Medical Respiratory Sensor Model FS6122B FS6122 series mass flow sensors are specially designed for personal ventilators for CPAP (continuous positive airway pressure). The sensor integrates MEMS mass flow sensor with a MEMS pressure the necessary information for the poper ...
Come From Week Technology LTD
TGS3870-B00 Gas Sensor for the detection of both Methane and Carbon Monoxide Features: * Miniature size and low power consumption * High sensitivity and selectivity to both methane and carbon monoxide (CO) * Low sensitivity to alcohol vapor * Long life and low cost ...
Come From Week Technology LTD
TGS826 - for the Detection of Ammonia Features: * High sensitivity to ammonia * Quick response to low concentrations of ammonia * Uses simple electrical circuit * Ceramic base resistant to severe environment Applications: * Ammonia leak detection in refrigerators * Ventilation ...
Come From Week Technology LTD
