CONOFLOW MOTORIZED TRANSDUCERS

The Motorized Transducer accepts an electrical signal of 115-volt AC or 24-volt
DC and provides a 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa)
output. Other outputs are available. The electrical input is a time duration signal.
The 115-volt AC units are available in 12 or 18 second durations and the 24-volt
DC models are available in durations of 10 or 20 seconds.
When energized, the motor rotates at a constant speed in the direction selected
to increase or decrease the pneumatic output. Standard time required for full span
output is either 10, 12, 18 or 20 seconds depending on the motor utilized. If energized
for a fraction of its full span time, the output will change by a fractional
amount. When de-energized, the motor remains in its last position with a constant
output pressure. These units incorporate limit switches which de-energize the
motor when the preset upper and lower limits are reached.
CONTROLLER PULSE WIDTH
The M/P Transducer was originally designed with 1970s controller technology in
mind that resulted in extremely slow pulses by todays standards. These slow pulses