Gas Boss 1100 sensor

GasBoss and CO2-Boss are Rel-Tek trademarks.

The GasBoss*1100 has proven reliable, even in the rigors of coal mining, offering economical, effective CH4 monitoring. Unit is ideal for areas where the concentrations of methane exceed the normal ranges of pellister type units which are not usable above 5% CH4... such as: gas utilities, gas drilling, coal degassification, methane drainage, petrochemical plants, coke ovens, foundries, heat treatment industries, etc. Note that the "CO2Boss*1100 is the CO2 version of this same NDIR instrument. Call for more information or to order.

The desired CH4 range can be specified. The standard unit is slightly non-linear, and a response or calibration curve is supplied. This is not a problem with trip point control. However, if a strictly linear analog output is required, then order the linearizing module. Accuracy is about 3% of full scale, repeatability is about 1% FS.

Fast warm-up, operational in 30 seconds. Power consumption about 30 watts. An optional AC pump provides a means to extract a remote sample (about 500 ml/min) through a long delivery tube. Two 1/4" dia hose barbs are provided on the unit. A particulate filter is standard.

This self contained unit houses an optical infrared source and solid state absorption analyzer, the electronics for providing 4-20mA and 0-1VDC analog outputs, plus a 110VAC power supply, two SPDT individually settable trip relays and a meter... all packaged in a 10x7x7" (254x178x178mm) dust/water proof fiberglass enclosure. Weight is about 6 pounds (2.7kg). Contacts are rated at 115VAC/1A. An alternate 12VDC input power can be supplied on special request.

The GasBoss?*1100 is a breakthrough in economy and performance. A third the cost of others with similar specs, this unit is designed to serve industry and commercial businesses where budgets are tight and maintenance is minimal.


Technology: Non-dispersive Infrared (NDIR)

Parameters: Methane in high concentrations, 0-1-5-25-100% CH4

used for detect Methane in high concentrations, 0-1-5-25-100% CH4

  • Theory:Optical Sensor
  • Usage:Gas Sensor
  • Brand Name:Rel-Tek
  • Place of Origin:Pennsylvania United States
  • Country:United States
  • telephone:1-412-373-6700
Delivery Time: Please Call or email
Theory: Optical Sensor
Usage: Gas Sensor
Brand Name: Rel-Tek
Place of Origin: Pennsylvania United States
*Your name:
*Your Email:
*To:Rel-Tek Corporation
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

GH-SW320 InGaAs VGA Area Sensor

GH-SW320 SWIR Sensor are two-dimensional image sensors that have a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900nm-1700nm) and extended wavelength ...

Come From Dongguan Zhonglin Technology Co., Ltd.

640 InGaAs VGA Area Sensor

GH-SW640 InGaAs area image sensors are two-dimensional image sensors that have a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900nm-1700nm) and extended ...

Come From Dongguan Zillion Technologies Co., Ltd.

320 InGaAs QVGA Area Sensor

GH-SW320 InGaAs area image sensors are two-dimensional image sensors that have a hybrid structure consisting of a CMOS readout circuit (ROIC: readout integrated circuit) and back-illuminated InGaAs photodiodes for short wavelength infrared (SWIR, 900nm-1700nm) and extended ...

Come From Dongguan Zillion Technologies Co., Ltd.