The network for temperature compensation is positioned on a covered board as a thickened part of the connecting cable. The force limit is the greatest force in direction of the measurement axis that the sensor can endure if it features the overload protection. This protection is not suitable for using the sensor in the overload range oftentimes, neither for sudden loads. The load must be introduced to the center and in axial direction. Torsion and bending forces must be avoided.
The force to be measured is introduced via the threaded pin on the active side and the bottom side of the cylinder shaped sensor body. The clinging to of the inner threading and the thread flange and bottom side should be assured. Two stabilizing membranes in the interior of the sensor reduce the disturbing influences of lateral force and torque to a minimum and guarantee a high long-term stability of the electrical and mechanical values.
Description
The thread part of the active side is releasable for sensors up to measuring range
non-sensitive to disturbances, simple introduction of force, min. lateral sensitivity, tension and compression, overload protect
Delivery Time: | Usually on stock, subject to reconfirmation |
Package: | Airfreight / Export suitable packaging included |
small dimensions: | highly accurate |
Brand Name: | burster |
Model Number: | 8431 and 8432 (w. overload protection) |
Place of Origin: | Germany |
Model Number: | 8431/32 |
Brand Name: | burster |
Place of Origin: | Germany |
These two sensors are small in size and high in accuracy. They can load and measure force in both directions. They are suitable for batching scales, hopper scales, hook scales and medical equipment. Types ofTension Compression Load Cell TJL-2 tension and compression load cell ...
Come From Anhui Tianguang Sensor Co.,Ltd
Rated Capacity 20,50,100,200,500N1,2,5,10,20KN Rated Output 2mv/V(20,50N is 1mv/N)(100N is 1.5mv/V) Non-Linearity within 0.1% R.O. Repeatability within 0.1% R.O. ...
Come From Algol Instrument Co., Ltd.