CONOFLOW ELECTROPNEUMATIC TRANSDUCERS
Product Details
The Conoflow GT_2 Series Transducer accepts a DC voltage input and provides a
proportional 3-15, 3-17 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa) output. The
input range is adjustable from a minimum of 0-5 VDC to a maximum of 0-60 VDC.
Note that there are two circuit boards provided for this unit. One for input signals
of 0-5 to 0-32 VDC and one for 0-33 to 0-60 VDC inputs. Two individual boards
are provided as a 1.5K resistor is added to the circuit board for the 0-33 to 0-60
VDC input to reduce power dissipation in the range potentiometer at these higher
inputs.
These transducers are available in either high or low flow capacity configurations
(Maximum Air Delivery Rate). The high capacity models incorporate a booster
DIMENSIONAL DATA - ADVERTISING DRAWINGS:
GT Series - High Capacity: A28-7
GT Series - Low Capacity: A28-9
GT Series - 2 Pipe Mounting Bracket: A28-22
relay which eliminates the need for additional boosters or relays when operating
air actuated valves or final control elements. The low capacity versions use a fixed
orifice and are utilized for input signals to pneumatic positioners. NEMA 3R
housing requirements are optional.
Design characteristics of quality and reliability are backed by Conoflows high
standard of manufacturing and years
- Country:United States
- telephone:1-843-563-9281
|
The Conoflow GT_2 Series Transducer accepts a DC voltage input and provides a proportional 3-15, 3-17 or 6-30 PSIG |
Send inquiry / quota request to CONOFLOW ELECTROPNEUMATIC TRANSDUCERS
Relate products of CONOFLOW ELECTROPNEUMATIC TRANSDUCERS
The ControlAir Type-500X converts a current or voltage input signal to a linearly proportional pneumatic output pressure. This versatile instrument is designed for control applications that require a high degree of reliability and repeatability at an economical cost. The ...
Come From ControlAir, Inc.
Conoflows Model GPT82 Pressure to Current Transducer simplifies the monitoring of control loop systems by converting a pneumatic signal to a proportional current output. The compact, lightweight design affords easy line mounting installation into a 2-wire instrument loop. An ...
Come From Conoflow
No air consumption100% solid-state piezoresistive silicon pressure sensorHigh air flow capacityUniversal 24 VAC/VDC supply voltageField selectable 4 to 20 mA, 0 to 5 VDC or 0 to 10 VDC inputShort circuit and reverse polarity protected inputs and outputsAuto/manual switch with ...
Come From MAMAC Systems Inc.
The Motorized Transducer accepts an electrical signal of 115-volt AC or 24-volt DC and provides a 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa) output. Other outputs are available. The electrical input is a time duration signal. The 115-volt AC units are available in ...
Come From Conoflow
Conoflows Electro-pneumatic Transducers accept a variety of electrical input signals and convert them to proportional output signals of 3-15, 3-27 or 6-30 PSIG (21-103, 21-186 or 41-207 kPa). The GT_8 Series Transducers incorporate low impedance circuitry and a range selector ...
Come From Conoflow
