GeoSIG VE-1x Series Velocity Sensors
Product Details
The VE-1x series velocity sensors are based on a symmetrical rotating dual coil construction minimizing the force on the spring arms. The use of precious metals ensure optimum electrical contact and longer operating life. These velocity sensors operate from a wide range of input voltages and can be used for a variety of civil engineering and general vibration measurement applications. The sealed cast aluminum housing contains a MS style connector or a sealed cable inlet. The housing also incorporates a single bolt mount with three leveling screws. The sensors are further equipped with an impulse test circuit. VE-1x series are offered in two different uniaxial (VE-11H & 11V) as well as biaxial (VE-12) and triaxial (VE-13) configurations. With a frequency response of 1 to 315 Hz, the scale ranges from
- Country:United States
- telephone:1-805-531-9994
| The VE-1x series velocity sensors are based on a symmetrical rotating dual coil construction |
Send inquiry / quota request to GeoSIG VE-1x Series Velocity Sensors
Relate products of GeoSIG VE-1x Series Velocity Sensors
The VE-2x series velocity sensors are similar toVE-1x series. However, in 2x series the frequency response is between 4.5 to 315 Hz and the scale ranges from ...
Come From Seismic Systems Service
The VE-3x series cost effective velocity sensor has a frequency response between 4.5 to 315 Hz with a sensitivity of G = 27.3 Vs/m. The VE-31-H is the uniaxial horizontal, the VE-31-V uniaxial vertical, VE-32 biaxial and the VE-33 is the triaxial version. ...
Come From Seismic Systems Service
