Multi Function Transducer with RS485 MODBUS output

Multi Function Transducer with RS485 MODBUS output
A multi-function digital output transducer using digital signal processing to measure over 70 electrical parameters simultaneously. The DT-MF1 transducer simultaneously samples the current and voltage at a rate of 32kHz on each of the three phases. These samples are fed into digital signal processors which calculate the frequency, true rms current, voltage and active power (watts) of each phase. These readings are then averaged over a set number of cycles. the other parameters are then calculated from these readings.
The output of the transducer is in the form a of RS-485 serial databuss using the industry standard MODBUS RTU protocol. This allows PLCs, PCs, and other equipment to monitor remotely all the parameters from the transducer.