ISL29009 optical sensor

ISL29009
 
Non-Linear Output Current, Low Power Ambient Light Photo Detect IC
 
 
 
Ordering Information
 iBuy direct from Intersil  iBuy direct - out of stock  Request samples
 Check distributor inventory  Available in RoHS/Pb-Free  
Part No. Design-In
Status
Temp. Package MSL Price
US $
ISL29009IROZ-EVALZ Active   Eval Board N/A Contact Us  
ISL29009IROZ-T7 Active Ind 4OP 0.72
The price listed is the manufacturer's suggested retail price for quantities of 1K units. However, prices in today's market are fluid and may change without notice.
MSL = Moisture Sensitivity Level - per IPC/JEDEC J-STD-020
SMD = Standard Microcircuit Drawing
 
  Description

The ISL29009 is a light-to-current silicon optical sensor combining a photodiode and current amplifiers on a single monolithic IC. Similar to human eyes, the photodiode has peak sensitivity at 550nm and spans from 400nm to 700nm, rejecting UV light and IR light. The input luminance range is from 0.3 lux to 10,000 lux.

The integrated non-linear current amplifier boosts and converts the photodiode signal in a square root fashion, extending the light input dynamic range while maintaining excellent sensitivity at dim conditions with low lux levels. The device consumes minimal power over a wide range of ambient lux levels because the current consumption ramps at a square root fashion. A dark current compensation circuit aids the photodiode to minimize temperature dependent leakage currents in the absence of light, improving the light sensitivity at low lux levels.

In addition, the ISL29009 has an EN pin that can be used for a polling scheme extending portables' battery life.

The ISL29009 is housed in an ultra compact 2mmx2.1mm ODFN plastic case surface mount package. Operation is rated from -40

  • Country:Malaysia
  • telephone:60-408-432-8888
iBuy direct from Intersil iBuy direct - out of stock Request samples
Check distributor inventory
*Your name:
*Your Email:
*To:intersil Corporate
*Subject:
*Message:
Enter between 20 to 3,000 characters. English only.     Characters Remaining: 0 / 3000
*Enter the secure code shown below Mfrbee security Image      Reload Image

We do inquire for you , please wait ...

HT (260℃) High Temperature Fiber Optic Connector Sensor

HT (260℃) High Temperature Fiber Optic Connector Sensor High temperature resistant connector uses special fiber with high temperature survivable coating and special epoxy, which makes it resistant for 260°C and reflowable as well. HT(260℃)Connector Feature Fiber Type: ...

Come From Zhongshan Meisu Technolody Co.,Ltd

HT (260℃) High Temperature Fiber Optic Connector Sensor

How It Works Connector is a device for detachable connection between optical fiber and optical fiber. The high temperature fiber is fixed in the ceramic core, and the end face of the ceramic core is precisely ground into arc face (UPC) or Angle face (APC). The optical path ...

Come From Zhongshan Meisu Technolody Co.,Ltd

HT (260℃) High Temperature Fiber Optic Connector Sensor

High temperature resistant connector uses special fiber with high temperature survivable coating and special epoxy, which makes it resistant for 260°C and reflowable as well. HT(260℃)Connector Feature Fiber Type: SM, MM, PM, Transmitting energy fiber Connector Type: ...

Come From Zhongshan Meisu Technolody Co.,Ltd