MINIATURE LOW PROFILE LOAD CELL XFL-250

Extra low profile (3.5 mm standard height) 25 mm diameter 150 mV output F.S. For static and dynamic applications With or without through hole XFL-250 PDF |?0 The XFL-250 series from GS Sensors are low profile miniature force transducers which can be used in both static and dynamic applications where the space available is at a premium. The transducers employ an aluminium alloy(AU4G) or stainless steel (APX4) sensing element, depending on the measurement range, and are fitted with a fully temperature compensated wheatstone bridge equipped with high stability micro-machined silicon stain gauges. Two standard versions are available, one with a through hole of diameter 8 mm, one without through hole. As with all GS Sensors' transducers, custom versions are available, and the characteristics of the load cell may be completely defined with the option DIY. The characteristics given overleaf assume that the load will be evenly distributed over the surface of the load cell. ? D1 ? D2 ? D3 H1 H2 Newton Dimensions in mm 10 25 12 0 or 8 3 0.5 20 25 12 0 or 8 3 0.5 50 25 12 0 or 8 3 0.5 100 25 123 0 or 8 3 0.5 200 25 12 0 or 8 3 0.5 500 25 12 0 or 8 3 0.5 1000 25 12 0 or 8 3 0.5 2000 25 12 0 or 8 5 0.5 5000 25 12 0 or 8 5 0.5 Technical specifications Mechanical specifications E. M. ( Newton) 10 20 50 100 200 500 1000 2000 5000 Overrange without damage X2 X2 X2 X2 X2 X2 X2 X2 X2 Overrange without destruction X3 X3 X3 X3 X3 X3 X3 X3 X3 Stiffness 1x106 3x106 1.2x107 3x107 5.8x107 2x108 6.5x108 1.8x108 7.3x109 Material AU4G AU4G AU4G AU4G APX4 APX4 APX4 APX4 APX4 Electrical specificationsExcitation 10 Vdc Sensitivity 150 mV F. S. nominal Input impedance 1300 & nominal Output impedance 500 & nominal Zero offset